The lug pattern of a 2011 Honda Accord is a five-lug configuration on a 114.3 millimeter bolt circle (5x114.3). The hub bore is 64.1 millimeters, and the lug studs are M12 x 1.5. This specification applies to both the sedan and coupe models from that year.
In practical terms, this means you’ll need wheels that match the 5x114.3 pattern and a center bore that accommodates a 64.1 mm hub. If your new wheels have a different hub size, hub-centric rings can help center the wheel properly. Always confirm offset and brake clearance when sourcing replacements or upgrades.
Technical specifications
The following specs define the core measurements for wheel compatibility on the 2011 Accord.
- Bolt pattern: 5 holes on a 114.3 mm bolt circle (5x114.3).
- Center bore: 64.1 mm.
- Stud size/threading: M12 x 1.5 (five studs), with lug nuts sized accordingly.
These specifications help ensure that factory and many aftermarket wheels mount correctly and safely on the vehicle.
What to check when buying wheels
When shopping for wheels or tires for your 2011 Accord, verify these fitment factors to avoid fitment issues.
- Bolt pattern compatibility: 5x114.3.
- Center bore: 64.1 mm; use hub-centric rings if your wheel’s bore is larger.
- Offset and width: ensure the chosen wheels won’t rub the brakes or fenders and will fit within the guard clearance.
- Lug nut compatibility: confirm the lug nut thread size (typically M12 x 1.5) and seat type for the wheel.
If in doubt, consult the wheel manufacturer or a qualified technician to confirm compatibility with your specific trim and braking system.
Summary
The 2011 Honda Accord uses a 5x114.3 bolt pattern with a 64.1 mm center bore and M12 x 1.5 lug studs. This pattern applies across sedan and coupe models of that year, and drivers should verify hub bore compatibility and offset when selecting aftermarket wheels to ensure proper fit and safe operation.