The oil filter on a Jeep Patriot typically uses a standard 3/4-16 UNF threaded spin-on canister, and the outer diameter of the filter body usually runs about 2.6 to 3.0 inches (66–76 mm), depending on the brand and model you choose.
Variations exist between the two common Patriot engines (2.0L and 2.4L) and among aftermarket filters. To ensure a correct replacement, verify the exact filter model by engine code or by checking the part number on your current filter.
Engine options and filter compatibility
The Patriot commonly uses two gasoline engines, the 2.0L I4 and the 2.4L I4. For both, the spin-on oil filters share a standard 3/4-16 UNF thread, but the external canister diameter and overall height can vary by brand and application. This means you may see small differences in diameter across different filter makes even though the thread remains the same.
The following list outlines dimensions you’re likely to encounter when shopping for Patriot oil filters. Use this as a guide while recognizing that exact numbers depend on the filter brand.
- Thread size: 3/4-16 UNF is the common specification for Patriot engines with spin-on filters.
- Canister outer diameter: typically about 2.6–3.0 inches (66–76 mm).
- Filter height (uncompressed): commonly around 3.0–4.0 inches.
- Brand/model variation: different brands may have slightly different diameters and heights within the same thread standard.
Because filter shapes and sizes vary by manufacturer, use the listed range as a guideline and always confirm the exact dimensions on the product page before purchasing.
How to verify the right filter for your Patriot
Before you buy a replacement, follow these steps to ensure compatibility with your Jeep Patriot’s engine and space constraints.
- Identify your engine and year (2.0L or 2.4L inline-four; model years typically span the Patriot’s production period).
- Check the current oil filter’s part number or stamping; use that number to locate a direct replacement.
- Look up filters by engine and year in a reputable parts catalog to confirm threading and canister size.
- Verify the thread size is 3/4-16 UNF and that the filter’s length and diameter will clear nearby components in the engine bay.
If in doubt, consult a parts professional or the vehicle’s service manual. The Jeep Patriot’s filters are widely documented, and multiple brands offer suitable 3/4-16 UNF spin-on options for both the 2.0L and 2.4L engines.
Summary
In short, the Jeep Patriot’s oil filter uses a 3/4-16 UNF thread, with typical canister diameters in the 2.6–3.0 inch range (about 66–76 mm). Exact measurements vary by brand and model, so always verify the replacement’s dimensions against your engine type and available space.