The bolt pattern for Honda Civic Sport is a 5-lug configuration on a 114.3 mm bolt circle (5x114.3); the center bore is typically 64.1 mm.
This standard applies to modern Civic Sport models across recent generations, but market-specific or older variants can differ, so it’s wise to verify your exact vehicle’s specs before purchasing wheels.
Bolt pattern essentials
The following specifications are the core fitment details you need to understand when shopping for wheels for a Civic Sport.
- Number of bolts: 5
- Bolt circle diameter (BCD): 114.3 mm (approximately 4.5 inches)
- Center bore: 64.1 mm
- Lug nut size and seat: typically M12 x 1.5 thread with a conical (acorn) seating
These specs help ensure wheels align properly with the hub, leave adequate spoke clearance, and fit without adapters. When in doubt, measure your current wheels or check the vehicle’s owner’s manual and factory service literature.
Notes on market and generation variations
Most modern Honda Civic Sport models in the US and many other markets use the 5x114.3 pattern, spanning several recent generations. However, some older Civics or non-US markets have used different patterns, such as 4x100, so always confirm with your VIN, door sticker, or the wheel spec sheet for the exact configuration on your particular car.
Summary: The Honda Civic Sport typically uses a 5x114.3 bolt pattern with a 64.1 mm center bore. Verify your year and market if you’re sourcing wheels or adapters, and consider hub rings if the center bore differs from new wheels you intend to install. This ensures proper fitment, safety, and performance.