The bolt pattern for most Honda Accord models with five lug wheels is 5x114.3 mm (five bolts on a 114.3 mm circle, or 4.5 inches).
In practice, this means you’ll typically see five lug holes arranged around a circle that measures 114.3 millimeters in diameter. While this pattern is standard for many recent Accords, variations can exist by market or generation, so it’s important to verify against your exact model year and region before purchasing wheels or adapters.
Bolt pattern basics
What the numbers mean
Wheel lug patterns are described by two numbers: how many bolts (lugs) and the diameter of the circle those bolts form. For most five-lug Honda Accords, the standard is 5x114.3 mm (5 on 114.3 mm). This is also commonly referred to as 5x4.5 inches in imperial units.
Center bore and wheel offset also affect fitment. The typical hub-centric bore for many Hondas is around 64.1 mm, and some aftermarket wheels require a hub-centric ring if their bore is larger than the hub.
- Pattern: 5x114.3 mm (5 lugs on a 114.3 mm circle)
- Common across most Honda Accord generations with five-lug wheels
- Center bore: typically 64.1 mm; hub-centric rings may be needed if the wheel bore is larger
These factors determine whether a wheel will mount correctly and sit flush against the hub, so they’re important when shopping for replacements or upgrades.
How to verify for your specific Accord
Where to look for official specs
To confirm your exact lug pattern, start with the official sources and measurements for your car’s year and market, then double-check with your wheels.
Use the following guidelines to verify compatibility when shopping for wheels or tires:
- Check the owner’s manual or Honda’s official spec sheets for your model year
- Measure the bolt circle if you have access to the wheels: across the lug holes, see if it matches 114.3 mm (4.5 inches)
- Confirm the center bore (and note whether hub-centric rings are required) and review wheel offset and width for proper clearance
Verification helps prevent mounting issues and ensures safe, proper alignment and performance.
Summary
For most Honda Accord models with a five-lug setup, the bolt pattern is 5x114.3 mm (5 on 4.5 inches). Always verify the exact specification for your year and market, and consider center bore and offset in addition to the lug pattern when selecting wheels or adapters. When in doubt, consult the owner’s manual or a Honda dealer to confirm precise fitment.