The bolt pattern for most 2019 Audi models is 5x112 with a 66.6 mm center bore.
In practice, this lug pattern is the standard for the vast majority of Audi’s 2019 lineup, including sedans, crossovers, and SUVs. However, there can be regional variations or special editions, so it’s important to confirm the exact specification for your particular vehicle using the owner's manual, the information sticker on the door jamb, or by checking with an Audi dealer. The lug pattern describes how many lug holes the wheel has (five) and the diameter of the circle those holes form (112 millimeters), while the center bore size determines how the wheel centers on the hub.
Bolt pattern basics
Understanding the note-worthy terms helps ensure you select wheels that fit without modification. The bolt pattern (lug pattern) combines two key measurements: the number of lug holes and the bolt circle diameter. The center bore is the hole at the wheel’s center that fits around the hub and helps center the wheel on the axle. For most 2019 Audis, the standard is five lug holes on a 112 mm circle and a 66.6 mm center bore.
Model-wide consistency for 2019 Audi models
For the 2019 model year, Audi’s mainstream lineup generally shares the same lug pattern: 5x112 with a 66.6 mm center bore. This applies across the core models and trims, including A-series, Q-series, and related variants. There are occasional regional or edition-specific exceptions, so always verify for your exact vehicle using official documentation or a dealer.
How to verify your specific car
To confirm the bolt pattern for your exact vehicle, use one or more of these methods: check the owner’s manual section on wheels and tires; inspect the label on the driver’s door jamb or inside the fuel filler cap for wheel specification data; measure the diameter of the bolt circle by counting the lug holes and measuring the distance across two opposite holes; and verify the center bore size from the wheel spec sheet. If you’re uncertain, contact an Audi dealer or a qualified wheel shop with your VIN.
What to know if you’re shopping aftermarket wheels
When purchasing aftermarket wheels for a 2019 Audi, ensure they match the 5x112 bolt pattern and the 66.6 mm center bore. Also verify the wheel offset (ET) and width to avoid rubbing or caliper clearance issues. If the wheel center bore is larger than the hub, hub-centric rings are often recommended to ensure proper fit and vibration-free operation.
Summary: The 2019 Audi lineup predominantly uses a 5x112 bolt pattern with a 66.6 mm center bore. This standard simplifies wheel compatibility across most models, but always verify your exact vehicle specifications with official documentation or a dealer to account for any regional or edition-specific differences.