The 2017 Honda Civic uses a 5-lug, 114.3 mm bolt circle with a 64.1 mm center bore. This pattern is standard across most trims of the 9th-generation Civic, including LX, EX, EX-L, Sport, and Si. When shopping for wheels or replacements, verify both the bolt pattern and the center bore to ensure a proper fit.
Bolt pattern basics for the 2017 Civic
Understanding wheel compatibility starts with three core specifications: bolt pattern (lug pattern), bolt circle diameter, and hub bore. For the 2017 Civic, the working specifications are straightforward and widely supported by aftermarket wheels, but it’s important to confirm each component for your specific wheel design.
Below is a quick reference of the essential specifications you should know when assessing wheel options for a 2017 Civic.
- Bolt pattern: 5-lug on a 114.3 mm bolt circle (5x114.3).
- Center bore: 64.1 mm.
- Notes: Most 5x114.3 mm wheels will fit a 2017 Civic, provided the center bore is accommodated and the brake caliper clearance is adequate for the chosen wheel design.
In practice, this means the vast majority of wheels marketed for “5x114.3” will fit the 2017 Civic, as long as you verify hub-centric requirements and clearance with the brake system of your exact trim and wheel choice.
Verifying compatibility for your car
To avoid fitment issues, follow these steps before purchasing wheels or aftermarket rims:
- Confirm the vehicle’s bolt pattern and center bore from the owner’s manual or a trusted spec sheet: 5x114.3 mm bolts and a 64.1 mm center bore.
- Compare with the wheel’s specifications from the vendor. If the center bore is larger, hub-centric rings may be required to ensure proper centering; if smaller, the fitment is not suitable without modification.
- Check brake caliper clearance and overall wheel offset and width with the chosen wheel design, especially on higher-performance trims or wheels with aggressive offsets.
Following these checks helps ensure safety and proper handling, while allowing you to select wheels that match the Civic’s factory geometry.
Summary
The 2017 Honda Civic predominantly uses a 5x114.3 mm bolt pattern with a 64.1 mm center bore. This configuration is common across most 9th-generation Civics, making many aftermarket wheels compatible, provided center bore and clearance considerations are respected. Always verify specifications with the wheel vendor and consider hub-centric rings if needed.
Is the Honda Civic 5x114?
The stock bolt pattern for the 2022-present Honda Civic is 5x114.
What does a 5x100 bolt pattern fit?
The 5x100 wheels perfectly fit Audi, Chevrolet, FAW, Lexus, Chrysler, Toyota, etc. Choose Discounted Wheel Warehouse and get the perfect 5x100 bolt pattern!
What's the bolt pattern on a 2017 Honda Civic?
Wheel Configuration Reference
| Vehicle Make / Model | Year Range | Bolt Pattern |
|---|---|---|
| Honda Civic (Si) | 2017 to 2020 | 5x114.3 |
| Honda Civic (Si) | 2022 to 2026 | 5x114.3 |
| Honda Civic (All Except Si and Type R) | 2022 to 2026 | 5x114.3 |
| Honda Civic (Type R) | 2023 to 2026 | 5x120 |
What is the best oil for a Honda Civic?
Honda recommends using Genuine Honda Motor Oil 0W-20, approved by the Environmental Protection Agency and Honda.