The bolt pattern is 5x112 mm — five lug holes arranged on a 112-millimeter circle.
The 2017 Audi S3 (8V generation) shares this widely used VW Group pattern with many of its contemporaries, which affects wheel compatibility when upgrading or replacing wheels. Below is a concise guide to what this means for you when shopping for wheels or tires.
Bolt pattern specifics for the 2017 Audi S3
Key details to verify when selecting wheels for this model are listed below.
- Bolt pattern: 5x112 mm (five lug holes on a 112 mm circle).
- Center bore: typically 66.6 mm for most Audi models of this era; ensure your wheels are hub-centric or use proper rings/adapters if needed.
In short, always confirm both the 5x112 bolt pattern and the center bore compatibility to ensure a safe, proper fit for the vehicle.
Why this matters for wheel shopping
Using wheels with a mismatched pattern or center bore can prevent proper mounting or cause vibrations. Always verify pattern, bore, and offset with the wheel manufacturer or your dealer, ideally using your vehicle’s VIN to pull exact specs.
How to verify on your own
You can measure the bolt pattern by counting the lug holes and measuring the distance between opposite lug holes to confirm a 112 mm circle. For the center bore, measure the opening in the hub that accepts the wheel; if it’s 66.6 mm, the wheel is typically compatible in a hub-centric setup with the correct rings if needed.
Summary
The 2017 Audi S3 uses a 5x112 bolt pattern. When replacing wheels, verify 5x112 compatibility and a matching center bore (66.6 mm) to ensure a proper, secure fit and safe driving experience.
What is the bolt pattern on the Audi S3 2017?
5x112 mm
The Audi S3 uses a 5-bolt mounting system. The first generation features a 5x100 mm bolt pattern, while newer models use a 5x112 mm pattern (5x112).
What stud pattern is Audi S3?
5x112
The third-generation Audi A3 and S3 came out swinging with sharp styling, turbo power, and the kind of premium interior Audi is known for. From the factory, they were equipped with 18x7. 5 ET51 or 19x8 ET49 wheels, bolted up with Audi's go-to 5x112 lug pattern and 57.1mm hub bore.
Are 4.5 and 114.3 the same?
Both numbers describe the same fitment, and 114.3 mm is simply the metric conversion of 4.5 inches.
What Audi has a 5x112 bolt pattern?
The Audi A4 has maintained the 5x112 bolt pattern since the B5 generation launched in 1994. Every iteration follows this standard, including the B6 (2000-2006), B7 (2004-2009), B8 (2007-2012), B8 Facelift (2011-2016), B9 (2015-2020), and B9 Facelift (2019-2025).