The bolt pattern is 5x114.3 mm (5 on a 4.5-inch circle).
The 2016 Honda CR-V uses a five-lug wheel hub with a bolt circle of 114.3 millimeters in diameter, which is commonly described as 5x114.3 or 5x4.5 inches. This specification is essential for wheel compatibility when replacing rims or installing aftermarket wheels.
What the pattern means for your vehicle
Bolt pattern describes how many studs the wheel uses and the circle those studs form on the hub. For the 2016 CR-V, there are five lug holes arranged on a circle that is 114.3 mm in diameter. This is a standard pattern shared by many Honda models from the era.
Key measurements you need to know
- Number of lug holes: 5
- Bolt circle diameter: 114.3 mm (4.5 inches)
- Common misperception: Some vehicles use 5x100 or 5x115; the 2016 CR-V uses 5x114.3
- Aftermarket considerations: Verify hub bore size and wheel offset in addition to the bolt pattern
Knowing these measurements helps determine wheel compatibility and prevents installation problems.
How to verify compatibility before buying wheels
Before purchasing wheels, confirm the bolt pattern on your specific vehicle and the wheel you intend to install. If you’re shopping for aftermarket rims, double-check that the listing specifies 5x114.3 and also verify hub bore size and offset to ensure a proper fit.
Verification steps
- Check the owner's manual or a vehicle specification sheet for the bolt pattern listed as 5x114.3
- Inspect the wheel label or measure the lug arrangement if you have an existing wheel that fits
- Confirm the hub bore size and the wheel offset to ensure proper fit and clearance
Conclusion: With the 5x114.3 bolt pattern, most 2016 CR-V wheels and many compatible aftermarket options will fit, but always confirm hub bore and offset to ensure a safe, proper installation.
Bottom line and practical takeaways
For the 2016 Honda CR-V, the bolt pattern is 5x114.3 mm. This means five lug holes arranged on a circle 114.3 mm in diameter (4.5 inches). When selecting wheels, verify the bolt pattern, center bore, and offset to ensure a proper, safe fit.
Summary: The 2016 CR-V uses a 5-lug, 114.3 mm bolt circle (5x114.3). Always verify hub bore and offset along with the bolt pattern when replacing wheels to guarantee compatibility and safe operation.