The bolt pattern on a 2014 Honda Accord is a five-lug, 114.3 mm pitch circle diameter (5x114.3). The hub bore is 64.1 mm, and the lug nuts are typically M12 x 1.5.
This means most aftermarket wheels labeled for a 5x114.3 bolt pattern will fit, provided the wheel's offset and center bore match the car's specs. The 2014 Accord is part of the ninth generation (2013–2017), and this bolt pattern is common among many Hondas of that era, but always verify compatibility for a specific wheel and trim, as brake caliper clearances and suspension components can vary.
Bolt pattern specifics
When shopping for wheels, the most important measurements to know are the bolt pattern, center bore, and lug hardware. Here are the core numbers for the 2014 Accord:
- Bolt pattern: 5x114.3 mm (5-lug, 114.3 mm pitch circle diameter)
- Center bore: 64.1 mm
- Lug nut size: M12 x 1.5 (thread pitch may vary by model year or wheel type)
- Wheel compatibility note: Many aftermarket wheels are offered in this bolt pattern, but check offset and brake clearance for your specific trim and wheel size
With the correct bolt pattern and hub bore, most wheels designed for 5x114.3 will fit the 2014 Accord, assuming the offset and diameter are appropriate and the brake calipers do not interfere.
Verification and compatibility
Beyond the bolt pattern, verify several other factors to ensure a proper fit and safe driving performance:
Practical steps to verify fit
Follow these steps before purchasing or mounting new wheels:
- Confirm the wheel's bolt pattern matches 5x114.3 mm.
- Measure or confirm the center bore is at least 64.1 mm; if the bore is larger, hub-centric rings may be needed for proper centering.
- Check the offset and backspacing to avoid rubbing against suspension components or the fender.
- Ensure the brake rotor size and caliper clearance are compatible with the wheel width and spoke design.
- Consult the vehicle's manual or a wheel compatibility guide, or have a professional mount and test fit the wheels.
When in doubt, rely on a reputable tire and wheel shop to confirm fitment before final mounting.
Summary
The 2014 Honda Accord uses a 5-lug, 114.3 mm bolt pattern (5x114.3), with a 64.1 mm center bore and lug nuts M12×1.5. This configuration supports a wide range of aftermarket wheels, but you must also verify offset, diameter, hub bore, and brake clearance to ensure a proper, safe fit.