The bolt pattern on a 2014 Audi A5 is 5x112 mm. This means there are five lug holes arranged on a circle 112 millimeters in diameter, a common configuration for Audi models from that period and a key factor when matching wheels or aftermarket rims.
Bolt pattern basics for the 2014 A5
The 2014 A5 family—including the coupe, cabriolet, and Sportback variants—uses a five-lug mounting pattern of 5x112 mm. In addition to the bolt pattern, the wheel hub’s center bore and overall offset matter for proper fitment. While the basic pattern is consistent across these body styles, exact specifications like center bore and offset can vary by wheel design and trim, so it’s important to verify for your specific setup.
Key specs to confirm before purchasing aftermarket wheels for a 2014 A5 include:
- Bolt pattern: 5x112 mm
- Center bore: 66.6 mm
- Offset considerations: varies by wheel design; verify with wheel spec sheet and vehicle compatibility
Matching these specs is essential to ensure proper fitment, hub centering, and brake clearance. If you're unsure, consult the wheel manufacturer or a qualified technician.
Additional fitment considerations
Even with the correct bolt pattern, other fitment factors can affect compatibility. Pay attention to center bore, offset, brake clearance, wheel width, and overall diameter to avoid rubbing or clearance issues.
- Center bore compatibility: ensure the wheel’s bore accommodates the hub (66.6 mm) or plan to use hub-centric rings where appropriate
- Offset and width: verify that the chosen wheel’s offset and width won’t cause rub or clearance problems with brakes or suspension
- Brake clearance: some wheels may require specific spoke designs or caliper clearance
In short, while the bolt pattern is the primary hurdle, other fitment factors can require careful checking or professional guidance.
How to verify wheel compatibility for your 2014 A5
Use this quick checklist to confirm that a wheel will fit your vehicle before purchase or installation.
- Confirm the bolt pattern is 5x112 mm.
- Check the center bore: ensure it is 66.6 mm or plan to use hub-centric rings if the wheel has a different bore.
- Verify offset and wheel width against your vehicle’s brake package and fender clearance.
- Ensure lug hardware matches the wheel type (lug bolts vs lug nuts) and torque specifications.
- Test-fit if possible and confirm there is no rubbing at full lock and under suspension travel.
If you’re unsure about any specification for your exact 2014 A5 trim, consult the dealer or a professional tire/wheel shop to avoid fitment issues or safety risks.
Summary
For a 2014 Audi A5, the bolt pattern is 5x112 mm with a center bore of 66.6 mm. When selecting wheels, verify the bolt pattern, center bore, and offset for your specific wheel, and check brake clearance and fender/ suspension fitment. When in doubt, seek professional guidance to ensure a safe and proper fit.