The bolt pattern is 5x114.3 mm (five lugs on a 114.3 mm circle). The center bore is 64.1 mm, and lug nuts use M12 x 1.5 threads with a 60-degree conical seat.
The bolt pattern describes how the wheel mounts to the hub and is essential for wheel compatibility. For the 2012 CR-V, this 5x114.3 pattern is common among Honda models of that era and affects which aftermarket wheels will fit, as well as considerations like hub-centric rings and seat type.
Bolt pattern specifications
Key measurements that define wheel mounting on the 2012 CR-V are listed below.
- Bolt pattern: 5x114.3 mm (five lug holes on a circle 114.3 mm in diameter)
- Center bore: 64.1 mm (center hub hole)
- Lug nut size and seat: M12 x 1.5 with a 60-degree conical seat
- Hub-centric vs lug-centric: Factory wheels are typically hub-centric to the 64.1 mm bore; some aftermarket wheels are lug-centric or use rings for bore compatibility
- Common applications: Shared across many Honda models from the early 2010s; always verify the exact wheel model
Having these specifications aligned ensures proper fitment and safe operation. If any spec differs, wheels may not mount correctly or could cause vibrations and safety issues.
Practical considerations for wheel shopping
Before purchasing wheels or tires, consider these practical steps to verify compatibility with your 2012 CR-V.
- Check the vehicle’s door placard or owner's manual for the official bolt pattern and center bore specification
- Measure the distance between opposite lug holes to confirm the 114.3 mm bolt circle
- Confirm the center bore (64.1 mm) and whether hub-centric rings are needed for aftermarket wheels
- Ensure lug nuts are M12x1.5 with the correct 60-degree conical seat and compatible with the wheel
- Consider wheel offset and width to maintain proper clearance and suspension geometry
Correct verification reduces the risk of improper fitment, vibration, or safety concerns on the road.
How to verify on your vehicle
Simple steps to confirm bolt pattern and related specs on your CR-V:
- Look at the door jamb placard or owner’s manual for the wheel bolt pattern and center bore guidance
- Measure the lug circle: distance between two opposite lug holes, then multiply by two to verify 114.3 mm
- Measure the center bore on the wheel hub: it should be 64.1 mm to match the hub; if not, consider hub rings if the wheel bore is larger
- Check the lug nut style on your vehicle and ensure the replacement wheel’s lug nuts are compatible (M12x1.5, 60-degree conical seat)
- Test-fit with a qualified professional if possible before driving on public roads
Once verified, you’ll have a reliable basis to select wheels that fit properly and maintain safe handling.
Summary
The 2012 Honda CR-V uses a 5x114.3 mm bolt pattern with a 64.1 mm center bore and M12x1.5 lug nuts with a 60-degree conical seat. This combination is common among late-model Hondas, but always verify center bore, seat type, and wheel offset for any aftermarket wheels. Proper verification helps ensure safe, reliable wheel installation.