The bolt pattern on a 2007 Honda Odyssey is 5x114.3 mm (5 lug holes on a 114.3 mm bolt circle).
For North American 2007 Odysseys, this 5-lug, 114.3-mm bolt circle is the standard configuration used across many Honda models of that era. If you’re shopping for wheels or adapters, verify also the center bore, lug stud size, and recommended wheel offset for your exact vehicle to ensure proper fitment.
Bolt pattern essentials
Here are the core measurements you should verify when checking wheels for a 2007 Odyssey. The items below are the key specifications you’ll encounter in wheel listings and installation guides.
- Bolt pattern: 5x114.3 mm (5 lug holes on a 114.3 mm bolt circle; also described as 5 on 4.5 inches).
- Center bore: 64.1 mm (hub bore size; center rings may be needed for some aftermarket wheels).
- Stud size/thread pitch: typically M12x1.5 (lug bolts/nuts follow this standard for many Hondas of this era).
- Wheel offset: commonly around +40 mm, but exact offset varies by wheel design and model year; confirm for each wheel
Note: While these specs apply to the 2007 Odyssey in North America, market variations can exist. Always verify with the wheel manufacturer or a trusted parts retailer before purchase.
Compatibility considerations
Beyond the bolt circle, other fit factors matter for safe installation. The vehicle’s brake caliper clearance, wheel width, and hub centering all influence whether a given wheel will fit properly. When in doubt, consult a professional installer or reference the vehicle’s manual and the wheel manufacturer’s fitment guide to avoid rubbing or improper hub centering.
Market notes
Some markets outside North America may have slightly different center bore or offset specifications. If you’re applying 2007 Odyssey wheels to a non-US model, confirm the exact figures for your region.
Summary
The 2007 Honda Odyssey uses a 5x114.3 mm bolt pattern with a center bore of 64.1 mm and typical lug studs of M12x1.5. While this pattern is common among Honda models of the era, always verify center bore, offset, and clearance for your specific wheel choice to ensure proper fitment and safety. For best results, confirm details with the wheel manufacturer and, if needed, seek professional installation.