The 2001 Honda Odyssey uses a 5-lug bolt pattern with a 114.3 mm bolt circle (5x114.3). The hub bore is 64.1 mm. This combination is typical for the 1999–2004 Odyssey models and is important when selecting wheels or adapters.
Understanding this pattern helps you choose compatible wheels, brake components, and adapters. The 2001 Odyssey belongs to the third generation, which shares this bolt pattern across its early-2000s range, making cross-year compatibility common for wheels and aftermarket parts as long as other specs (offset, width, center bore) also align.
Bolt pattern specification
Key specs you should know when sourcing wheels or adapters for a 2001 Honda Odyssey:
- Number of lug nuts: 5
- Bolt circle diameter: 114.3 mm (4.5 inches)
- Center bore: 64.1 mm
- Lug nut size and seat: typically M12 x 1.5 with a conical (60-degree) seat
- Common wheel compatibility: the 5x114.3 pattern is shared with many Honda/Acura models; verify offsets and hub-centric requirements for each wheel
Concluding: These specifications define the standard wheel fitment for the 2001 Odyssey and are essential when shopping for wheels or spacers.
How to verify on your vehicle
To confirm wheel compatibility for a particular set of wheels or adapters, follow these steps:
- Count the lug studs: confirm there are five.
- Measure the bolt circle diameter: measure from the center of one lug hole to the center of the opposite lug hole; it should be 114.3 mm.
- Check the hub bore: measure the opening that fits over the hub; it should be 64.1 mm. If the wheel bore is larger, hub-centric rings may be needed for proper alignment.
- Verify offset and width: ensure the wheel offset and width will clear suspension components and fenders without rubbing.
- Consult official specifications or the dealer: if in doubt, reference the 2001 Odyssey owner’s manual or Honda tech specs, or contact a dealer or reputable wheel manufacturer for confirmation.
Concluding: By verifying lug count, bolt circle, bore, offset, and width, you can confidently choose wheels that fit the 2001 Odyssey.
Notes on hub-centric rings and adapters
Some aftermarket wheels may have a different hub bore. If the wheel bore is larger than 64.1 mm, hub-centric rings can help center the wheel properly and reduce vibration. If you need to run wheels from another model or brand, ensure the pattern (5x114.3) and offset are compatible, and use appropriate rings or adapters if required by fitment.
Summary
The 2001 Honda Odyssey uses a 5x114.3 bolt pattern with a 64.1 mm center bore. This configuration is typical for the late-1990s to early-2000s Odysseys and many compatible Honda/Acura wheels. Always verify lug count, bolt circle, bore, offset, and wheel width before purchasing to ensure a proper, safe fit.