In brief: the 2000 Honda Accord uses a 5-lug wheel pattern on a 114.3 mm bolt circle (5x114.3).
In detail, this applies to the sixth-generation Accord (1998–2002). The wheels use five lug studs arranged on a 114.3 mm circle, with a center bore of 64.1 mm. This pattern is standard for most Accords of that era and determines which wheels will mount correctly. When shopping for wheels or adapters, also consider wheel offset, width, and the hub bore to ensure a proper fit.
Bolt pattern specifics
Key measurements that define wheel compatibility for the 2000 Accord are listed below.
- Number of lug holes: 5
- Bolt circle diameter (PCD): 114.3 mm (4.5 inches)
- Center bore: 64.1 mm
- Lug nut size: typically M12 x 1.5 thread; seat commonly 60-degree conical (verify for your wheels)
These values are the baseline for most wheel replacements. If a wheel has a different center bore or PCD, adapters or hub rings may be required for proper fitment and safety.
Why this matters for wheels
Using wheels with a different bolt pattern or center bore can lead to poor alignment, vibration, and safety issues. Knowing the correct pattern helps you avoid incompatible wheels and ensures balanced rotation and reliable performance.
Additional notes on fit and safety
Always verify wheel compatibility with a qualified shop or the dealership, especially if you are considering aftermarket wheels. Check also for correct offset and width to avoid rubbing fenders or suspension components.
How to verify the bolt pattern on your Accord
To confirm the exact fit for your car, follow these steps. This will help you avoid buying wheels that won’t fit your vehicle:
- Identify your vehicle generation and trim, and confirm it is a 2000 Accord (sixth generation, 1998–2002).
- Count the lug holes to confirm there are five.
- Measure the bolt circle diameter by placing a ruler across the lug bolt centers and converting to mm; you should land near 114.3 mm.
- Measure the center bore of the hub; expect 64.1 mm.
- Check wheel offset and width with your current wheels or consult the manufacturer specs to ensure compatibility with your suspension and fenders.
If any of these specifications differ from your intended wheels, use hub rings or choose wheels that match the factory pattern to maintain proper alignment and safety.
Summary
The 2000 Honda Accord uses a 5x114.3 bolt pattern with a 64.1 mm center bore. When selecting wheels, verify pattern, center bore, and offset to ensure a proper fit. If in doubt, consult a dealer or a professional installer to confirm compatibility and safe installation.