The bolt pattern is 4x114.3 mm (four lug holes arranged on a circle with a diameter of 114.3 millimeters).
What the bolt pattern means
The bolt pattern, also known as the PCD (pitch circle diameter), determines wheel compatibility. For the 1998 Prelude, the standard configuration is a four-lug setup on a 114.3 mm diameter circle. This pattern guides which aftermarket wheels will fit without spacers or adapters and helps ensure safe mounting.
Related fitment considerations
Beyond the pattern itself, other factors affect wheel compatibility, including the center bore size, lug seat type, and wheel offset. While 4x114.3 mm is the typical pattern for this model, some aftermarket wheels may require hub rings or different seating configurations. Always verify the exact specs for your vehicle and wheel combination.
How to verify the bolt pattern on your Prelude
There are several reliable ways to confirm the bolt pattern for your specific car: check the owner's manual or a VIN-based parts catalog, consult a reputable parts retailer, or physically measure the pattern by counting the lug holes and measuring the distance between opposite holes. For the 1998 Prelude, you should find four lug holes spaced to form a 114.3 mm circle.
Summary
In short, a 1998 Honda Prelude uses a 4x114.3 mm bolt pattern (four lugs on a 114.3 mm circle). When shopping for wheels, also confirm center bore and offset to ensure proper fitment, and consult official sources if there is any doubt about your specific vehicle configuration.