The wheel bolt pattern for a 2004 Honda Accord is 5 on 114.3 millimeters (5x114.3).
This applies to most 2004 Accord models built for the North American market, representing the seventh-generation design that ran from 2003 to 2007. In addition to the 5-lug pattern, you should note a 64.1 mm center bore and typically an M12 x 1.5 lug nut thread with a 60-degree conical seat; offset varies by wheel design and trim. Always verify with your owner's manual or by measuring if you plan to install aftermarket wheels.
Bolt pattern basics for the 2004 Accord
Understanding the key specifications helps you shop safely for wheels, tires, or substitutions that maintain proper alignment and brake clearance.
What does 5x114.3 mean?
It means there are five lug studs arranged on a circle with a diameter of 114.3 millimeters. In inches, that's roughly 4.5 inches, a common standard for many Honda models.
Shopping for wheels: compatibility checklist
Before you buy aftermarket wheels, use this checklist to ensure a proper fit and safe operation.
- Bolt pattern: 5x114.3 mm (5-lug pattern)
- Center bore: 64.1 mm
- Lug nut thread size: M12 x 1.5
- Lug nut seat: 60-degree conical
- Hub-centric vs lug-centric: hub-centric rings may be needed if the wheel bore is larger than the hub
With these specifications in mind, you can select wheels that align with the 2004 Accord's mounting system, ensuring proper seating and braking clearance.
How to verify the bolt pattern on your car
When in doubt, verify by counting the lug holes and measuring the bolt circle diameter, or check your vehicle’s service documentation and the wheel documentation for the exact specification for your trim level.
Summary
The 2004 Honda Accord uses a 5x114.3 bolt pattern with a 64.1 mm center bore. For aftermarket wheels, confirm the lug nut size (M12x1.5), seat type (60-degree conical), and potential hub-centric needs to ensure a safe, precise fit for your specific vehicle configuration.