The 2015 Dodge Journey typically uses H11 bulbs for the low-beam headlights and 9005 bulbs for the high beams, with fog lights (if your model has them) using H11 as well.
Details vary by trim and regional market, so always verify the exact bulb numbers on the bulbs themselves or in the owner's manual. If your Journey has aftermarket upgrades or is a non-US model, bulb types may differ.
Headlight bulb types by function
Here are the standard bulb types you’ll likely encounter in the 2015 Journey’s headlight system. Note that some trims with fog lamps or regional specifications may differ.
- Low beam: H11 halogen bulbs
- High beam: 9005 (HB5) halogen bulbs
- Fog lights (if equipped): H11 halogen bulbs
These are the typical factory configurations for the 2015 Dodge Journey. Upgrades to HID or LED lighting require compatible housings and electrical components.
How to replace the headlights safely
If you need to replace a bulb, follow these practical steps to ensure a proper fit and safe handling.
- Turn off the engine and remove the key; engage the parking brake.
- Open the hood and locate the headlight assembly from the engine bay or the wheel well.
- Disconnect the negative battery terminal to prevent any electrical shorts (wait a moment if the system was recently in use).
- Access the bulb from the back of the headlight housing; remove any retaining clips or connectors.
- Carefully twist or pull out the old bulb; avoid touching the glass with bare skin.
- Install the new bulb, reattach the connector and clips, and reseal the housing.
- Reconnect the battery, turn on the headlights, and verify operation and alignment if needed.
Note: Upgrading to HID or LED requires compatible ballast and may necessitate housing modifications; consult a professional to avoid electrical issues or misalignment.
Additional notes
Bulb availability can vary by market and trim level. If you’re unsure, consult the owner’s manual, check the bulb numbers printed on your current bulbs, or contact a Dodge dealership or auto-parts retailer with your vehicle VIN for the exact replacements.
Summary: For the 2015 Dodge Journey, the standard factory setup uses H11 for low beams, 9005 for high beams, and H11 for fog lights where installed. Verify your exact configuration with official documentation, as trims and regions may differ, and ensure proper safety and alignment when replacing bulbs.