There isn’t a single bulb type for every 2013 Chrysler 300. Most cars in this model year use halogen headlights, but some trims offer HID headlights. The typical setups are: halogen low beams with 9005 high beams, or HID low beams with a 9005 high beam. The exact bulb depends on trim level and options.
To determine your exact bulb type, check the owner's manual, inspect the headlight housing label, or look at the bulb itself. Bulb sizes can vary by production date and trim, so confirming for your specific vehicle is recommended.
Halogen headlight configuration (most common)
Low-beam bulb
The common halogen low-beam bulb used in many 2013 Chrysler 300 headlights is the H11 type.
- Low beam: H11
Halogen low-beam replacements are widely available and straightforward to source.
High-beam bulb
For halogen headlight setups, the high-beam bulb is typically a 9005 (often referred to as HB3).
- High beam: 9005
Ensure you handle halogen bulbs with clean gloves to avoid oil transfer from skin onto the bulb, which can shorten bulb life.
HID projector headlight configuration (optional)
Low-beam bulb
When equipped with HID projector headlights, the low-beam bulb is an HID bulb. Depending on the exact production date and ballast, this can be one of the common HID types such as D3S or D2S.
- Low beam: D3S or D2S (depends on ballast configuration)
Distinct HID systems may use different ballast/bulb compatibility, so the exact model should be confirmed for your car.
High-beam bulb
High beams on HID-equipped 2013 Chrysler 300s are typically a halogen bulb, commonly 9005, though some Bi-Xenon configurations can differ by design.
- High beam: 9005 (in many HID setups, though verify for your specific build)
Because HID high-beam implementations vary, it’s wise to verify with the vehicle’s manual or a parts diagram for your exact VIN.
How to confirm for your car
Use these steps to identify the precise bulb type for your 2013 Chrysler 300:
- Consult the owner’s manual or the service/parts section for your vehicle’s bulb size by trim.
- Look at the label on the back of the headlight housing or inside the hood where the bulb type is often printed.
- Remove the current bulb (carefully) and read the bulb number printed on its base if accessible.
Once you know the exact bulb type, purchase from a reputable retailer or your dealership to ensure proper fit and performance.
Summary
The 2013 Chrysler 300 can use either halogen or HID headlights, depending on trim. Halogen setups typically use H11 for low beams and 9005 for high beams, while HID setups use D3S or D2S for low beams with 9005 high beams. Always verify with your manual, the housing label, or a VIN-specific parts lookup to be sure you get the correct bulb for your exact vehicle.