The 2008 Honda Accord typically uses H11 bulbs for the low beams, 9005 bulbs for the high beams, and H11 bulbs for fog lights if your model is equipped with them. Always confirm with your owner’s manual or the bulb labeling on the headlight assembly, since trim and market variations can occur.
Overview of common configurations for the 2008 Accord
The following reflects the most widely seen setup for US-market 2008 Accords. Variations can exist in other markets or in certain trims.
Bulbs by function
Identify the bulbs by their role in the headlight system. This list shows the typical types used in the 2008 Accord.
- Low-beam headlamps: H11
- High-beam headlamps: 9005 (HB3)
- Fog lights: H11 (if equipped)
Use the exact bulb type and wattage recommended by Honda. Incorrect bulbs can affect beam pattern and electrical load.
How to verify the correct bulb for your specific car
To ensure you buy the right bulb for your exact vehicle, check the owner’s manual, inspect the bulb label on the headlight housing, or use a parts lookup by VIN. Practice these steps to confirm the correct type.
- Open the hood and locate the headlight assembly corresponding to the beam you need to replace.
- Remove the bulb cover and disconnect the wiring harness, noting how it is attached.
- Look for the bulb type printed on the bulb base or refer to the manual to compare part numbers (H11 for low beam; 9005 for high beam).
- Replace with the same type and wattage, reassemble, and test the lights.
Following these steps helps ensure compatibility and proper illumination.
Summary
For the 2008 Honda Accord, the standard configuration uses H11 for low beams, 9005 for high beams, and H11 for fog lights when equipped. Always verify against your specific vehicle's documentation or bulb housing labeling, as trims and markets can lead to variations.