There isn’t a single grease that Honda uses for every part. Different components and model years require different lubricants, with Honda Genuine Grease or an OE-approved equivalent specified for each application. For exact products and grades, consult your owner's or service manual or ask a Honda dealer.
Grease selections are driven by factors like temperature, load, and movement type. Using the wrong grease can compromise performance and longevity, so it’s important to follow the official guidelines for each lubrication point.
Where Honda specifies grease by component
Below is a general guide to the common lubrication categories you’ll encounter on Honda vehicles. Always verify the exact spec in the official manuals for your exact model and year.
- Bearings and chassis joints (such as wheel bearings and suspension pivots): typically a high-temperature lithium-based grease with MoS2 additives, often specified in an NLGI 2 consistency. Use Honda Genuine Grease or an OE-equivalent that meets the OEM spec.
- CV joints and drive shafts: usually an extreme-pressure (EP) grease designed for high-load joints, often lithium-based with MoS2, commonly around NLGI 2. Again, use the Honda-approved grease for CV joints or the recommended equivalent.
- Gearboxes and transmissions: transmissions are generally lubricated with gear oil rather than grease. If the service manual calls for grease in a particular seal or bearing, use the OEM-approved product; otherwise, don’t substitute grease for gear oil.
- Other sealed components or specific service points: some parts may come pre-greased at the factory or require only minimal lubrication during service. Always follow the manual for these cases to avoid damaging seals or internal components.
Concluding: For each lubrication point, use the OEM-specified grease to ensure compatibility with seals, temperatures, and loads. If you’re unsure, your Honda dealer can confirm the exact product and grade for your model and year.
How to find the exact grease for your Honda
To ensure you’re using the correct lubricant, follow these steps:
- Check the owner’s manual or service manual for the recommended grease specification, including base oil type, additives, and NLGI grade.
- Look up the Honda Genuine Grease product number in the parts catalog or service bulletin for your vehicle.
- Ask a Honda dealer or certified technician to confirm the right grease for your exact model and year and the specific lubrication point.
Concluding: Using the correct grease protects bearings, joints, and seals and helps reliability and longevity. If you’re replacing parts yourself, verify the exact spec before purchasing any lubricant.
Summary
Honda does not rely on a single grease for all applications. The recommended lubricant varies by component and model year, with Honda Genuine Grease or OE-approved equivalents specified for each lubrication point. For accurate guidance, consult the official manuals or your local Honda dealer to identify the exact grease for your vehicle.