The Fram filters commonly recommended for the 2013 Nissan Pathfinder with a 3.5-liter V6 are the Extra Guard, Tough Guard, and Ultra lines, with model numbers typically listed as PH7317, TG7317, and XG7317. Always verify exact fit using Fram’s cross-reference tool and your vehicle identification number (VIN) since variations by trim or engine code can apply.
Fram filter options commonly compatible
Fram maintains a vehicle cross-reference catalog that maps each filter model to compatible vehicles. For the Pathfinder’s 3.5L V6, the following Fram filters are frequently listed as fitting the housing across model years:
- PH7317 — Fram Extra Guard
- TG7317 — Fram Tough Guard
- XG7317 — Fram Ultra
Note: These model numbers refer to the same basic filter body across different Fram lines, with differences mainly in filtration media or gasket materials. Always verify with Fram's official catalog using your exact year, trim, and engine code to ensure the correct fit.
How to verify compatibility for your Pathfinder
To ensure you select the right Fram filter, use these verification steps before purchase.
- Gather your vehicle details: year, trim, engine code (3.5L V6 for most Pathfinders in 2013), and VIN. The VIN is the fastest way to confirm a correct cross-reference.
- Use Fram’s official cross-reference tool or dealer catalogs. Enter year, make, model, and engine to see recommended Fram filter models for your exact configuration.
- Match the filter’s thread size and gasket to the OEM specification. If in doubt, compare physically with your current filter or ask a professional to verify.
- Consider your preferred Fram line (Extra Guard vs. Ultra) based on needed filtration efficiency and maintenance interval. Higher-end lines generally offer better filtration and longer intervals but at a higher price.
- Double-check compatibility confirmation from Nissan or a trusted parts retailer using your VIN.
With the official cross-reference, you can confidently pick the Fram model that fits your Pathfinder and avoid fitment mistakes.
Installation tips and maintenance considerations
Once you have the correct filter, follow standard oil change procedures: warm engine, loosen drain plug, replace gasket, install new filter hand-tight plus a quarter-turn, fill with the recommended oil, and check for leaks. Use the vehicle’s owner’s manual for oil capacity and type; typical 2013 Pathfinder 3.5L uses around 5 quarts with filter change, depending on the oil grade and whether you replace the filter. Always recycle used oil and filter per local regulations.
Summary: For a 2013 Nissan Pathfinder, Fram offers compatible options such as PH7317 (Extra Guard), TG7317 (Tough Guard), and XG7317 (Ultra). Verify exact fit with Fram’s cross-reference tool using your VIN to ensure engine and trim align with the filter model, and follow standard oil change guidelines for best results.