The 5x112 bolt pattern fits most wheels on vehicles from the Volkswagen Group and Mercedes‑Benz. In practice, Audi, VW, Seat, Skoda, and Mercedes-Benz models commonly share this pattern, but hub bore and offset vary and must be checked before swapping wheels.
Brands that typically use 5x112
These brands are the backbone of the 5x112 ecosystem. While individual models can differ, the pattern is standard across many of their passenger cars and SUVs.
- Audi
- Volkswagen (VW)
- Seat
- Skoda
- Mercedes-Benz
Within these brands, many models share 5x112 wheels, but always confirm the exact year and trim, as there are exceptions.
Representative models and fit considerations
To illustrate common usage, here are representative models that frequently run 5x112 wheels. Always verify for your specific year and configuration.
- Audi: A3, A4, A6, Q5, Q7, TT
- Volkswagen: Golf, Passat, Tiguan, Jetta, Atlas
- Seat: Leon, Ateca, Tarraco
- Skoda: Octavia, Superb, Kodiaq
- Mercedes-Benz: C-Class, E-Class, GLC, GLE, S-Class (and many other passenger models)
Even within these models, wheel fit can vary by year, trim, and option packages. Always cross-check the exact specifications before purchasing wheels or tires.
Key fit considerations when swapping to 5x112 wheels
Matching bolt patterns is only the first step. A successful swap requires attention to hub bore, offset, brake clearance, and mounting hardware.
- Hub bore and center bore: VW Group cars typically use a 57.1 mm center bore, while Mercedes-Benz cars commonly use 66.6 mm. If you’re mixing wheels across brands, you may need hub-centric rings to center the wheel properly.
- Offset and wheel width: The offset (ET) and wheel width determine how far the wheel sits in the fender and under the brake caliper. Incorrect offset can cause rubbing or handling changes. Typical ranges vary by model, so check the OEM spec for your exact vehicle.
- Brake clearance: Some wheels may interfere with calipers or large fixed brakes. Check spoke design, barrel depth, and overall clearance for your brake setup.
- Lug hardware and mounting method: Depending on the vehicle, you may use lug nuts or wheel bolts. Verify the correct mounting hardware and torque specs for your car and the chosen wheels.
- Load and speed ratings: Ensure the new wheels meet or exceed the vehicle’s required load and speed ratings.
With proper attention to hub bore, offset, and clearance, 5x112 wheels can be swapped with a wide range of factory or aftermarket options. Always confirm specifics for your exact model and year.
How to verify fit before buying
Practical steps help prevent mismatch and potential safety issues when considering 5x112 wheels.
- Check the owner’s manual or official specifications for your exact year/model to confirm the bolt pattern, center bore, and recommended offset.
- Measure your vehicle’s hub bore and compare with the wheel’s center bore; plan for hub-centric rings if needed.
- Use a wheel-fitment calculator or consult a professional installer to confirm offset compatibility and potential rubbing at full steering lock or suspension travel.
- Verify mounting hardware requirements (lug nuts vs bolts) and obtain the correct torque specs and any anti-seize or center-ring guidance.
- Test-fit if possible and take note of any rubbing or clearance issues; if encountered, seek alternatives or professional advice.
These steps help ensure a safe, reliable fit and preserve your vehicle’s handling characteristics.
Summary
The 5x112 bolt pattern remains a hallmark of European wheels, principally aligned with VW Group brands (Audi, VW, Seat, Skoda) and Mercedes-Benz. If your vehicle comes from these families, 5x112 is a strong starting point for wheel compatibility. Always verify center bore, offset, brake clearance, and mounting hardware for your exact model and year to ensure a proper, safe fit.
Is 5x4 the same as 5x112?
5x112 in inches: 5x4.
The 5x112 bolt pattern converts to 5x4.
Can a 5x112 fit a 5X114 3?
For those who say 5x112 fits 5x114. They do go on, but technically they do not and are NOT centered like REAL 5X114. You'll have vibrations at high speeds and run the risk of breaking studs.
Is 5x112 bolt pattern the same as 5x120?
No, the 5x112 and 5x120 bolt patterns are not the same. While both patterns feature five bolt holes, the distance measured in millimeters across the circle of the bolts differs, affecting which wheels will fit on which vehicles. This distinction is crucial for vehicle owners to understand to avoid compatibility issues.
What cars fit the 5x112 bolt pattern?
5x112 rim pattern works for cars like Audi, Volkswagen, Mercedes-Benz, BMW E30, and Mazda Miata. You can choose popular 5x112 wheel sizes like 17 inches, 18 inches, 19 inches, 20 inches, or 22 inches. Different finishes include Matte Black With a Double Dark Tint Face, Gloss Black Milled, Brushed Titanium, etc.