The TPMS light on a Honda Fit warns that one or more tires are under-inflated or that the Tire Pressure Monitoring System has a fault. It is a prompt to check tire pressures and inspect the system to ensure safe driving.
Understanding the sign
The Honda Fit uses a Tire Pressure Monitoring System (TPMS) that automatically checks the air pressure in each tire. When the pressure in any tire falls below the vehicle’s recommended level, or if the system detects a sensor fault, the warning light turns on. The light is typically amber and may appear as a tire icon or the letters TPMS depending on the model year.
What to do when the light comes on
Follow these steps to verify and address a TPMS warning. The steps assume you are dealing with a direct TPMS common in newer Fits, where sensors are in each tire.
- Pull over safely and inspect all tires for visible damage or leaks. Look for nails, cuts, or objects lodged in tread.
- Check tire pressures when the tires are cold (ideally before driving). Use a reliable pressure gauge and compare with the recommended specification found on the door jamb sticker or the owner's manual.
- Inflate any tire that is below the recommended pressure to the specified level. If a tire cannot be inflated to spec due to a leak or damage, replace or repair it before continuing.
- If you have recently filled a low tire, drive the car for a short distance (a few miles) to allow the TPMS to relearn. In some models, the system relearns automatically after you drive at a steady speed for a while.
- After inflating and driving, recheck the tire pressures to ensure they remain at the recommended levels. If the warning light remains on, there may be a sensor fault or TPMS module issue.
Conclusion: In most cases, inflating to the recommended pressure will turn off the light within minutes of driving. If it stays on after you’ve corrected pressure, a professional inspection is advised to diagnose sensor faults, damaged wiring, or faulty transmitters.
Resetting or relearning the TPMS on a Honda Fit
Some Honda Fits allow a manual TPMS reset or relearn procedure, while others rely on automatic relearn after driving with properly inflated tires. The exact steps can vary by year and trim, so consult your owner’s manual for the precise procedure. The following provides a general guide you may encounter in common models.
- Ensure all tires (including the spare, if it’s a monitored tire on your model) are inflated to the recommended pressure.
- If your model has a TPMS reset option: access the vehicle’s settings menu, locate the TPMS or Tire Pressure option, and select Reset or Relearn. Then confirm and drive to complete the relearn.
- If there is no reset option, simply drive normally at highway speeds for 10–20 minutes to allow the system to relearn the tire positions and pressures automatically.
If the TPMS light continues to stay on after a proper reset/relearn attempt or you hear a warning that TPMS is malfunctioning, you should seek service. A technician can inspect the sensors, wiring, and control module and replace faulty sensors if needed.
Common reasons a TPMS warning persists
Bottom line—if the light won’t go away after you’ve addressed tire pressure, the cause is more technical: a dead sensor battery, damaged sensor, failed wiring, or a malfunctioning TPMS control module. In such cases, a dealership or qualified shop can diagnose with a scan tool and replace defective components.
What not to ignore
Tire pressures can drop over time, especially in changing seasons. Regularly check pressures at least once a month and before long trips to ensure optimum safety and fuel economy. If you notice a tire losing air fast, address it immediately.
Summary
The TPMS light on a Honda Fit signals that a tire is under-inflated or that the TPMS system has detected a fault. Start by checking and inflating your tires to the recommended pressures, then allow the system to relearn by driving. If the light remains on, or if you notice tire damage or sensor issues, have the system inspected by a professional. Regular checks help prevent unnecessary warnings and support safer driving.
Why is my TPMS light on but tires are fine on my Honda?
One of the most common reasons for a TPMS light staying on despite the tires being properly inflated is a sensor malfunction. TPMS sensors are typically located inside the tire and can wear out or become damaged over time, particularly if you've hit a curb, driven through a pothole, or been off-road.
Can I still drive my car if the TPMS light is on?
This is why you should maintain proper inflation pressure and try to avoid driving when the TPMS light is on. If you absolutely must drive a short distance on a tire with severely low pressure, drive very slowly and use extreme caution. The tire should be inflated or changed before driving anywhere.
Does AutoZone fix TPMS sensors?
At AutoZone, we carry replacement TPMS sensors for most makes and models. And if you need help resetting the TPMS light, we can offer helpful advice or refer you to a shop in our professional network.
How to fix TPMS light on Honda Fit?
And now when we look back up here The light blinks twice. And then turns. Off. So that's all we have to do once that lights off the system will automatically re-calibrate itself while as you drive.