The 2014 Honda CR-V key fob uses a CR2032 3-volt lithium coin cell battery. This article covers the standard battery type, how to confirm the correct size for your fob, and simple replacement steps to keep your remote functioning reliably.
Battery type and compatibility
The 2014 CR-V key fob generally uses a CR2032 3-volt lithium coin cell. This is the standard size for most remotes of that year and model. If you are unsure, check the battery inside the fob or consult the owner’s manual. Below is a quick reference of sizes you might encounter and their relation to Honda remotes.
Common fob battery sizes you might encounter for Honda remotes include the CR2032 and CR2025; the CR2032 is the typical choice for a 2014 CR-V fob, but some variants or repairs could use alternatives. Make sure the size matches the original.
- CR2032 — 3V lithium coin cell; standard for the 2014 CR-V key fob
- CR2025 — 3V lithium coin cell; sometimes used in different models or older remotes but less common for this year
- Other sizes (e.g., A23) are not typical for the 2014 CR-V fob and should be avoided unless specified by a dealer or manual
In most cases, the CR2032 is the correct choice for replacement. If you are unsure, remove the old battery and compare its dimensions to the replacement or consult official Honda documentation.
How to replace the battery
To replace the battery in the 2014 CR-V key fob, follow these steps. This process is simple and can be done with minimal tools; you'll typically need a small coin to pry open the fob.
- Purchase a fresh CR2032 3V battery from a reputable retailer.
- Flip the fob over and locate the small seam around the edge.
- Insert a coin into the seam and twist gently to pop the fob halves apart.
- Carefully separate the two halves to access the battery compartment.
- Remove the old battery, noting the orientation (positive side facing up).
- Insert the new CR2032 with the correct orientation.
- Snap the two halves back together until they click securely.
- Test the fob by pressing the lock and unlock buttons from a short distance to confirm operation.
After replacement, if the fob still doesn’t respond, recheck the battery orientation, inspect the contact springs for corrosion, and ensure the key blade or circuitry isn’t damaged. If issues persist, consult a Honda dealer or automotive locksmith for assistance.
Summary
The 2014 Honda CR-V key fob uses a CR2032 3V lithium coin cell. Replacement is straightforward: identify the correct size, replace with a fresh CR2032, reassemble, and test. When in doubt, refer to the owner's manual or seek professional help to ensure proper function.
What battery does my 2014 Honda CR-V key fob take?
And then go ahead and replace your little uh. Little baby screw. And um that's it so that's how you. Change um uh the key fob battery uh for Honda CRV.
What battery goes in a Honda CR-V key fob?
So you can pry the battery out put your thumb on the battery. So it doesn't fly out and pry underneath it the two flexible clips will allow it to pop. Out. Now bring in the new battery.
What type of battery does a 2014 Honda CR-V take?
MT-51R. The Interstate MT series delivers reliable battery life and enhanced performance in hot to moderate climates for an affordable price.
What size battery for a 2014 Honda key fob?
And a small uh Phillips head screwdriver to go ahead and pop it open to actually remove the screw. And if you want you can go ahead and use a flat blade as well uh but we'll just use my finger. Now.