In most Honda models, Brake Hold can be turned off by pressing the Brake Hold switch on the center console until the indicator light goes out. A single press generally deactivates the feature. If the system is engaged at the moment you want to stop, releasing the brake and pressing the switch again will disable it. Always refer to your specific model's manual for precise steps, as locations and terminology can vary by year and trim.
What Brake Hold Does
Brake Hold is a convenience feature that keeps the brakes applied for you after you come to a complete stop, so you don’t have to keep pressing the brake pedal. When activated, the system releases the pedal while the car remains stationary; you can move by pressing the accelerator. When off, the brakes release automatically only after you press the accelerator or apply the brake again, depending on driving conditions. The feature can be helpful in traffic and on hills, but you may prefer to disable it if you find it unnecessary.
Where to Find the Brake Hold Switch
Brake Hold is typically controlled by a physical switch on or near the center console, not by a menu setting. The exact location varies by model year.
- Most current Honda models place the Brake Hold switch on the center console near the gear shifter or cupholders, labeled "BRAKE HOLD" or with a brake icon.
- In some older or different trims, the switch may be adjacent to the steering wheel cluster on the left side or integrated with the instrument panel.
- If your model uses a different configuration, the indicator light on the instrument cluster will accompany the switch to show when Brake Hold is active.
If you still cannot locate the control, consult your owner's manual or contact a Honda dealer for model-specific instructions.
Steps to Turn Off Brake Hold
Follow these steps when the vehicle is safely stopped and you want to disable Brake Hold:
- Come to a complete stop and ensure the vehicle is stationary.
- Press the Brake Hold switch once to turn the feature off. The "BRAKE HOLD" indicator on the dash should disappear.
- Release the brake pedal and verify that the brakes aren’t held automatically if you plan to move.
- To re-enable Brake Hold later, press the switch again or drive and bring the system back on according to the owner’s manual guidance.
Note: In most Honda vehicles, turning off Brake Hold requires a physical action with the dedicated switch. If you cannot deactivate it with a single press, try pressing and holding the switch briefly or consulting the manual for model-specific instructions.
Model-specific variations
Different Honda models and model years may place the Brake Hold control in slightly different spots or use different indicators. The following examples cover common configurations:
- Honda Civic (recent generations): Brake Hold switch on the center console near the shifter.
- Honda CR-V/HR-V: Brake Hold switch on the center console within easy reach of the driver.
- Older models: The switch may be integrated with the instrument panel on the left side of the steering column.
When in doubt, check the owner's manual or ask a dealer for the precise location for your year and trim.
Safety and Practical Tips
Always ensure the vehicle is fully stopped before deactivating Brake Hold, especially in traffic or on slopes. Some drivers prefer leaving Brake Hold on in stop-and-go traffic for convenience, but if you’re unfamiliar with the function, practice in a safe area to understand its behavior before driving in heavy traffic.
Summary
Brake Hold in Honda vehicles is typically controlled by a physical switch on the center console. To turn it off, locate the Brake Hold switch and press it until the indicator light goes out. If you can’t find the switch, or if your model uses a different configuration, consult the owner’s manual or a Honda dealer for model-specific guidance. Practicing the steps in a safe, controlled environment helps you understand how Brake Hold behaves in your car.
How to get Honda out of brake hold?
Done second step is make sure the parking brake is engaged. Okay next step is click and hold wait for a beep. Let go press and hold again one big beep that means it's been deactivated.
Can I drive with brake hold on a Honda?
If a vehicle moves unexpectedly, it may cause a crash, resulting in serious injury or death. Never leave the vehicle when braking is temporarily kept by automatic brake hold and always park the vehicle by putting the transmission in Park (P) and applying the parking brake.
PDF
How do I turn off automatic brake hold?
Drive. You can also cancel auto hold by pressing the brake pedal. And pressing the auto hold switch or pressing the switch while driving.
Why does my Honda say brake hold?
So this way if I'm stopping. And stop and go traffic. I'm sitting here now when I hit the gas. It's going to release the hold button we're going to move forward until I hit the brake. Again.