If you’ve seen the tire pressure warning come on, the quickest fix is to bring all tires to the car’s recommended cold inflation pressure and then let the system relearn. Depending on your trim, you may be able to perform a manual reset if your Civic has a dedicated TPMS button; otherwise, the light often goes off automatically after a short period of driving on properly inflated tires.
Understanding the TPMS in the 2013 Civic
The 2013 Honda Civic uses a direct Tire Pressure Monitoring System (TPMS) that uses sensors in each wheel to monitor tire inflation. A flashing or steady warning light usually means one or more tires are underinflated or there’s a sensor issue. The exact reset method can vary by trim level and whether a manual reset switch is present.
Automatic relearn: driving with proper tire pressure
In many Civics, once you inflate all tires to the recommended cold pressures, the TPMS will automatically relearn after a few drive cycles. This means you don’t need to press any button unless your model specifically includes a reset switch. To maximize the chance of automatic relearn, drive for about 10 to 15 minutes at steady speeds (often 40 mph or higher) after inflation. If the light turns off on its own, you’re finished.
Manual reset procedure (if your model supports a TPMS reset button)
Some 2013 Civics include a dedicated TPMS reset button. If your car has this button, you can perform a manual reset after confirming all tires are at the correct cold pressures.
- Park with the engine off and the ignition in ON (no need to start the engine).
- Ensure all tires are inflated to the recommended cold pressure, found on the door jamb placard or in the owner's manual.
- Locate the TPMS reset button. It is commonly found under the dash to the left of the steering column or inside the glove box. If you don’t see a button, skip to the auto relearn guidance above.
- Press and hold the TPMS button until the TPMS indicator in the instrument cluster lights up or blinks (the light may blink several times).
- Release the button and drive for about 10 minutes at speeds above 30 mph to complete the relearn process.
After performing a manual reset, the system should acknowledge the new pressures and the warning light should turn off if the tires are correctly inflated and the sensors are functioning properly.
What to do if there is no reset button on your Civic
If your 2013 Civic does not have a TPMS reset button, rely on the auto relearn process by inflating all tires to the correct cold pressures and driving for the recommended duration and speed. If the warning light remains after a reasonable drive cycle, there may be a tire leak, damaged valve stem, or a faulty sensor that requires inspection by a technician.
What to do if the light stays on after attempts
If the TPMS light stays on despite proper inflation and attempted relearns, take these steps: check for slow leaks (a tire with a nail or puncture), verify valve caps are present and tight, and consider a professional scan for sensor faults or a dead sensor battery. A persistent TPMS warning may indicate a sensor failure or a tire pressure loss that needs repair.