Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How to reset the oil change light on a 2015 Honda Civic?

The quickest way to reset the oil life indicator on a 2015 Honda Civic is to turn the ignition to ON (engine off), navigate to Oil Life on the information display, and hold the SELECT/RESET control until it reads 100%. This restores Honda’s Maintenance Minder to track oil life from a full 100% again.


The 2015 Civic uses Honda’s Maintenance Minder system to monitor when an oil change is due. After you perform an oil change, resetting the indicator is essential so the system can accurately estimate the next interval. Below are the standard steps and a fallback method for variations in display setups or trims.


Step-by-step reset procedure


Use the following sequence to reset the Oil Life in most 2015 Civics. The steps assume the engine is off and you’re using the steering wheel controls to access the Oil Life display.



  1. Turn the ignition to ON (II) with the engine OFF.

  2. Use the SELECT/RESET control on the right side of the steering wheel to cycle the information display until the Oil Life percentage is shown.

  3. Press and hold the SELECT/RESET control for about 5 seconds until the Oil Life resets to 100%.

  4. Release the control, then turn the ignition off and start the engine to confirm the reset was successful.


After the reset, drive normally and the display should begin counting down from 100% as you accumulate miles/kilometers. If the indicator does not reset, repeat the steps once more or consult the owner’s manual for your specific trim.


Alternate reset method for different display configurations


Some 2015 Civics with different dash or information displays may require a slightly different access method. If the standard steps don’t work, try this variant that uses the vehicle’s Info/Trip controls to reach Oil Life before resetting.



  • Turn the ignition to ON (II) with the engine OFF.

  • Cycle through the information display using the Info/Trip or SEL/RESET controls until Oil Life is highlighted.

  • Press and hold the SEL/RESET control for about 5 seconds until the Oil Life reads 100%.

  • Turn the ignition off, then start the engine to verify the reset took effect.


If you still encounter trouble, check for any dashboard message indicating a system error or consult a Honda service professional. Ensuring you reset the Oil Life after every oil change helps maintain accurate maintenance scheduling and engine health alerts.


Summary


Resetting the oil life in a 2015 Honda Civic is a quick maintenance step tied to Honda’s Maintenance Minder. With the ignition on and engine off, navigate to Oil Life on the information display and hold the reset button until it returns to 100%. If your display differs, use the alternative method described above. Regular resets after oil changes help ensure timely oil maintenance and accurate alerts going forward.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.