Turn the ignition to ON (do not start the engine) and reset the Maintenance Minder via the instrument cluster until the oil life reads 100%.
This guide explains the standard instrument-cluster method for the 2019 Honda Fit and an alternate touchscreen method if your trim supports it, plus troubleshooting tips in case the reset doesn’t take.
Understanding the Maintenance Minder system
The Maintenance Minder is Honda’s built-in reminder system that tracks vehicle wear and schedules routine upkeep (oil changes, tire rotations, and other service). It displays a percentage for oil life, and when maintenance is due, a warning light or message appears on the dash. Resetting the minder should only be done after the required service has been completed.
Reset procedures
The following steps show the most common method using the instrument cluster controls. If your model has a touchscreen maintenance menu, see the alternate method below.
- Turn the ignition to ON (II) with the engine off.
- Use the SELECT/RESET knob on the instrument cluster to cycle to the "Oil Life" or equivalent Maintenance Minder display.
- When "Oil Life" is shown, press and hold the SELECT/RESET knob for about 5 seconds until the display changes to 100% or a confirmation message appears.
- Release the knob, then briefly turn the ignition OFF.
- Turn the ignition back to ON and start the engine to verify that the oil life shows 100% and the maintenance light is reset.
The reset is complete when the oil life reads 100% and the maintenance warning is cleared.
Alternate method for touchscreen-equipped trims
Some 2019 Honda Fit trims with the built-in touchscreen allow resetting Maintenance Minder through the vehicle’s settings menu. If your model supports this, use the touchscreen path to reset instead of the instrument cluster method.
- From the main touchscreen, access the Settings or Vehicle Settings menu.
- Navigate to Maintenance, Maintenance Minder, or a similar option.
- Select Reset or Reset Maintenance Minder.
- Confirm the reset when prompted; the oil life should return to 100%.
- Exit the menu, then start the engine to confirm the light is cleared.
Note: Menu labels may vary slightly by trim and software version. If you don’t see a Maintenance Reset option, rely on the instrument-cluster method above.
What to do if the reset doesn’t work
If the maintenance light remains after following the steps, double-check you completed a full reset (oil life showing 100%, then the warning cleared). Ensure the ignition is in the ON position without starting the engine, and hold the reset button for the recommended duration. If the light persists, the vehicle may require a dealer diagnostic to verify service status or potential system issues.
Summary
Resetting the 2019 Honda Fit’s service light is typically straightforward: use the instrument cluster’s SELECT/RESET control to restore oil life to 100%, or use the touchscreen-maintenance menu if your trim supports it. Always confirm the reset by restarting the car and verifying the display, and consult a dealer if the warning remains after multiple attempts.