You can reset the maintenance minder yourself in minutes by using the dash controls: turn the ignition to ON (II), access the Maintenance Minder, and reset the item by holding the reset button until the display confirms.
On a 2018 Civic, the exact steps depend on whether your car uses the instrument-cluster controls or the i-MID touchscreen. The following guide covers both common methods so you can reset regardless of your trim.
Resetting the Maintenance Minder
Follow these steps to reset the Maintenance Minder on a 2018 Civic.
- Turn the ignition to ON (II) with the engine off.
- Access the Maintenance Minder display. If your Civic uses the instrument cluster, press and hold the SEL/RESET (or similar) button on the dash to bring up the Maintenance Minder. If your Civic uses the i-MID touchscreen, use the Home/menu navigation to reach Vehicle Settings or Maintenance Minder.
- When the specific maintenance item (oil life, etc.) is displayed, select it to reset, or press and hold the SEL/RESET button until you see a Reset or RESET DONE prompt.
- Confirm the reset by following the on-screen prompt or by holding the button again until the display confirms the reset.
- Turn the ignition OFF, then ON again and verify that the maintenance item has been reset and the next service interval is displayed correctly.
After completing the steps, the maintenance light should be cleared and the next service due information updated on the display.
Alternative methods and tips
If the standard procedure doesn’t work or your Civic uses a different display path, try these alternatives and tips.
- i-MID touchscreen path: Home > Vehicle Settings > Maintenance Minder > Reset. Select each item and confirm to reset.
- Trip/RESET variant: Some trims respond to a press-and-hold of the TRIP or RESET button while the ignition is ON in order to trigger a reset.
- Multiple items: If there are several maintenance items listed (oil life, tire rotation, etc.), reset each item individually if your display requires it.
- Verification: After resetting, cycle the ignition off and back on to verify the indicator is cleared and the next service interval appears correctly.
- If the light persists: Refer to the owner’s manual for the exact path on your trim or contact a Honda dealer for assistance, as some vehicles may show a separate service item that requires attention.
In most cases, one of these paths will reset the minder; once completed, the next due interval will be shown anew and the maintenance light will be cleared.
Summary
Resetting the maintenance light on a 2018 Honda Civic is a simple owner operation. Use the dash controls or the i-MID menu to reach Maintenance Minder, select the item to reset, confirm, and then verify by cycling the ignition. If you run into trouble, consult the manual for your exact trim or contact a Honda service center for guidance.