The maintenance light on a 2015 Honda CR-V is part of Honda’s Maintenance Minder system. To reset it after a service or oil change, you typically turn the ignition to ON with the engine off and use the trip/RESET control to restore the Oil Life to 100%. This clears the current maintenance reminder for the next cycle.
What the Maintenance Minder Means for the 2015 CR-V
Honda’s Maintenance Minder tracks engine oil life and schedules service based on driving conditions. The display shows a percentage (Oil Life) rather than a simple "maintenance due" message. After you complete an oil change or required service, resetting the Oil Life to 100% tells the system you’ve completed the maintenance and it should start a new countdown for the next interval.
Resetting the Maintenance Minder: Step-by-Step
The following steps cover the standard reset method for most 2015 CR-V models with a traditional ignition. If your vehicle uses a push-button start, see the alternative method below.
- Turn the ignition to ON (II) with the engine off. Do not start the engine.
- Use the trip/ODO selector to cycle the display until the Oil Life percentage is shown.
- Press and hold the SELECT/RESET knob (the small button near the odometer) until the Oil Life resets to 100% or the display confirms the reset.
- Turn the ignition OFF, then start the engine to verify that the Oil Life reads 100% and the Maintenance Minder has been reset.
Note: Some trims label the button differently (for example SEL/RESET or TRIP). If your display shows a different path, look for Oil Life or Maintenance Minder and follow the same hold-to-reset sequence.
Alternative method for push-button start
For CR-V models with a Start/Stop button, perform the same procedure after turning the vehicle on without starting the engine. With your foot on the brake, press the Start/Stop button to ON, display Oil Life, and hold the reset control until it reaches 100%.
Troubleshooting
If the light will not reset after following these steps, or if another maintenance reminder remains active, there may be a system fault or an actual service is due. In that case, consult the owner's manual or contact a Honda dealer or qualified mechanic for a diagnostic check.
Summary
Resetting the maintenance light on a 2015 Honda CR-V is a quick, largely universal process: turn the ignition to ON without starting, display Oil Life, and hold the reset button until the reading returns to 100%. Verify by starting the engine. If issues persist, seek professional assistance to ensure the system is functioning correctly.