The TPMS (tire pressure monitoring system) on a Honda Accord is reset either with a dedicated reset button or through the vehicle’s calibration settings, followed by a highway relearn drive. The exact method depends on the model year, so check your owner's manual if you’re unsure.
In this article, you’ll find practical steps for the two most common reset methods, along with tips on preparing the tires and what to do if the warning persists. The guidance covers a range of mid-2010s to current models and notes where year-by-year differences typically appear.
Method 1: Reset via the TPMS button (common on many mid‑2010s to 2020s Accords)
Before starting the reset, ensure all four tires are inflated to the manufacturer’s recommended pressures as listed on the door jamb placard. The TPMS reset button is typically located on the lower left dash near the hood release lever, but in some trims it may be inside the glove box or center console.
- Check tire pressures and inflate to the specified recommended values for all four tires (and spare, if applicable in your maintenance logs).
- Turn the ignition to ON with the engine OFF. (Do not start the engine.)
- Find the TPMS reset button and press/hold it until the TPMS indicator light blinks or goes out after a steady sequence.
- Release the button and drive the vehicle at a steady highway speed for about 10 minutes to relearn the sensors.
- Confirm that the TPMS warning light stays off after the relearn drive.
After performing this method, the system should recognize the new tire pressures and clear the warning if there are no other issues. If the light returns, there may be a slow leak or a faulty sensor that requires further inspection.
Method 2: Recalibration through the vehicle settings (common on newer Accords)
Some modern Honda Accords offer a TPMS calibration option within the vehicle’s settings menu. This method is increasingly common in trims that emphasize a digital instrument cluster and advanced menus.
- Ensure all tires are inflated to the recommended pressures on the door jamb placard.
- Access the vehicle’s settings from the driver information display or infotainment system. Navigate to Settings > Vehicle > TPMS Calibration (or TPMS) > Calibrate.
- Initiate calibration or calibration/synchronization as prompted by the screen.
- Drive at highway speeds (typically 50–60 mph) for at least 10 minutes to complete the relearn process.
- Verify that the TPMS warning light remains off after the calibration and subsequent drive.
Not all models display a “Calibrate” option; if your screen only shows warning options or if the menu lacks TPMS calibration, rely on the physical reset button method or consult your owner’s manual for the exact menu path for your year and trim.
What to do if the warning won’t reset
If the TPMS light stays on after attempting either reset method and a proper tire pressure has been confirmed, consider these steps:
- Double-check each tire’s pressure with a reliable gauge and adjust to the recommended value.
- Inspect tires for slow leaks, punctures, or damaged valve stems, which can prevent proper seating of the sensor.
- Check the spare tire (if it’s a monitored wheel) for proper pressure, as some systems include it.
- If the light remains, a TPMS sensor may have a dead battery or failure; a professional tire shop or Honda service center can test and replace sensors as needed.
Persistent warnings are not just a nuisance; they can mask actual pressure issues. Treat a stubborn TPMS warning as a sign to inspect tires and, if necessary, seek expert help to avoid unsafe driving conditions.
Summary
Resetting the flat tire warning on a Honda Accord generally involves either a physical TPMS reset button or a calibration option in the vehicle’s settings, followed by a highway relearn drive. Always start by bringing all tire pressures to spec, then follow the method that matches your model year and trim. If the warning persists after these steps, have the tires and sensors checked by a professional to rule out leaks or faulty sensors.
How to reset a flat tire on a Honda Accord?
Key. Then we reach down below to our tire pressure moni monitoring system switch. We push and hold for 3 seconds. And you'll see your light has gone out and the system is in the recalibration mode.
How to get rid of accord tire pressure light?
So you're going to do it through this screen right here click your home button we're already on home go to settings. Go to vehicle. Choose your first option TPMS calibration. And then click calibrate.
Where is the TPMS reset button on a Honda?
If your Honda is equipped with a TPMS button, you'll find it to the left of the steering wheel.
Why doesn't my Accord have a tire pressure monitor reset button?
You need to replace the sensor. And the tire dealer should be able to program those to the ECU. For you for 2013 to 2016 Honda Accord owners.