Quick reset: press and hold the Power/Volume knob for about 10 seconds to reboot the radio. If that doesn’t resolve the issue, power-cycle the vehicle or use the radio’s factory reset option in Settings. If prompted for a code after reset, you’ll need the 4-digit radio code from your owner’s manual or dealer.
Soft reset and power cycling
These steps reboot the unit to clear most glitches without erasing all saved data.
- Press and hold the Power/Volume knob for about 10 seconds until the radio restarts.
- If the screen remains unresponsive, turn the ignition OFF, remove the key, wait about 60 seconds, then turn the ignition ON and try again.
- Once the unit restarts, test whether radios, Bluetooth, and navigation respond normally.
Soft reset and power cycling can clear temporary glitches and return basic functionality without affecting stations or paired devices.
Factory reset via the radio menu
For radios that include a factory reset option in Settings, this restores default settings while preserving basic vehicle functions. Availability depends on the exact radio (430N vs 730N) installed in your car.
- From the home screen, tap Settings.
- Navigate to System or General Settings.
- Choose Restore Factory Settings (Factory Reset) and confirm your choice.
- Wait for the unit to reboot with default settings.
Note: Not all trims show a factory reset option. If you don’t see it, skip this method and rely on a soft reset or consult the owner’s manual for your model.
Radio code and security after power loss
If the radio requests a code after a reset or battery work, you’ll need the vehicle’s 4-digit radio code to unlock it.
- Find the 4-digit code on the radio code card included with the vehicle documents, or obtain it from your dealer with your VIN.
- Enter the code on the keypad and press OK/Enter to unlock.
- If you enter the wrong code too many times, the system may lock for a period; wait and try again or contact the dealer for assistance.
- After successful entry, the radio should function normally and store the code for future use.
Having the radio code handy prevents lockouts during maintenance or battery work.
Compatibility notes (430N vs 730N)
2013 Chrysler 200 could use either the 430N (non-navigation) or the 730N (navigation) stereo. Menu labels and exact reset steps can differ between these units. If you have 730N, look for Factory Reset under Settings > System. If you have 430N, you might see Reset or an alternative path in Settings; when in doubt, consult the owner’s manual or contact a dealer for model-specific instructions.
Summary
Resetting the 2013 Chrysler 200 radio typically starts with a soft reset by holding the Power/Volume knob, followed by a power cycle if needed. If available, use the factory reset option in Settings for a full restore. If the unit asks for a code after reset, locate and enter the 4-digit radio code from the vehicle documents or dealer. Remember that navigation-equipped models (730N) and non-navigation models (430N) may have slightly different menu paths, so refer to the manual for your exact unit.
How to hard reset Chrysler radio?
How to Reset Uconnect®: Hard Reset
- Press and hold the temperature up and down buttons for five seconds.
- Scroll on your display screen until you see the option to reset to factory settings.
- Wait 30 seconds as the system resets completely.
How to reset Chrysler touch screen?
Until you come to the reset. Now tap on the reset. And here you have couple of options you can just restart the radio. You can restore settings to default.
How to do a hard reset on Chrysler 200?
So keep in mind that a hard reset will revert your system back to factory defaults with no customization.
- Press the temperature up and down buttons simultaneously for five seconds or more.
- When a menu appears, scroll to the option to reset to factory defaults.
- Wait 30 seconds while the system reboots.
How to reset radio in Chrysler 200 2013?
Steps to Reset Chrysler UConnect®
- Turn on your vehicle.
- Press and hold the volume and tuner knob buttons simultaneously.
- Hold for about 10 to 20 seconds until the screen goes black and the Chrysler logo appears.
- Release the buttons and wait for the system to reboot.