Replacing the wiper blades on a 2022 Hyundai Kona is a straightforward, tool-free task that restores visibility in rain. On most Kona models, the driver’s side blade is around 26 inches and the passenger side around 16 inches, but always confirm the exact sizes for your trim and region by checking the owner’s manual or the blade packaging.
This article walks you through identifying the right blades, gathering what you need, performing the swap safely, and testing the result to ensure you get a clean wipe without streaks or skips.
What you’ll need
Before you start, gather the replacement blades in the correct sizes and any adapters the blades require, plus a couple of simple cleaning supplies for best results.
- Two replacement wiper blades sized for your Kona (driver’s side ~26 inches, passenger ~16 inches is typical, but verify exact lengths on the packaging or in the manual).
- Adapters or connectors that come with the blades to fit your wiper arm (some blades include multiple adapters for different arm styles).
- Optional: microfiber cloth and a little windshield cleaner to wipe away dirt before installing the new blades.
- Optional: gloves or disposable wipes for grip and cleanliness while handling the arms.
With these items on hand, you’re ready to perform the swap with confidence.
Step-by-step guide
Use these step-by-step instructions to replace the blades without damaging the wiper arms or the windshield.
- Park the vehicle, turn off the ignition, and ensure the wipers are in the parked position. Gently lift the driver’s and passenger’s wiper arms away from the windshield so they stay upright and accessible.
- Remove the old blade. Locate the release mechanism on the blade’s connection to the wiper arm. Press or lift the release tab to detach the blade from the arm, then slide the old blade out of the connector or hook.
- Prepare the new blade. If your new blades include multiple adapters, select the one that matches your Kona’s wiper arm connector and snap it into the blade as directed by the packaging.
- Attach the new blade. Align the blade’s connector with the wiper arm, insert, and push until you hear or feel a click indicating a secure fit. Gently tug on the blade to confirm it’s locked in place.
- Return the wiper arm to the windshield. Lower the arm slowly so it seats on the glass without slamming, which could crack the windshield.
- Test the new blades. Start the engine and run the wipers at low speed, then at higher speed to verify full coverage and that no streaks or chattering occur. If streaks appear, re-check fit and, if needed, clean the blade edge and glass before testing again.
These steps should leave you with a secure installation and clear visibility when you need it most.
Adapter compatibility and tips
Understanding blade connectors helps avoid a loose fit. The driver’s side on many Hyundai Kona models uses a standard hook-style connection, while the passenger side may require a different adapter size. If your blades come with multiple adapters, try the one that best fits the arm and click it into place. When in doubt, consult the blade manufacturer’s instructions or your vehicle’s owner’s manual.
Troubleshooting and maintenance
After installation, a few quick checks can prevent poor performance or streaking. Here are common issues and how to address them.
- Streaks or gaps: Ensure the blade is fully seated and the connector is engaged. Clean the blade edge and windshield, then test again. If streaks persist, consider trying a new blade of the correct size.
- Chattering or noise: A dirty blade or glass surface can cause noise. Clean both surfaces and reinstall. If noise continues, replace with a fresh blade.
- Blades frozen to glass in cold weather: Do not force them. Warm the glass gently or use the vehicle’s defroster before attempting to lift or replace.
- Improper fit: Double-check that you selected the correct sizes and adapters for your Kona’s wiper arms. If the blade won’t click in securely, try the other adapter or consult the product instructions.
Regular inspection every 6–12 months (or sooner in harsh climates) helps maintain clear visibility and extend blade life.
Summary
Replacing the wiper blades on a 2022 Hyundai Kona is a quick, practical maintenance task that improves rain performance and safety. Start by identifying the correct blade sizes, gather the right adapters, follow the step-by-step installation, and test thoroughly. Keep spare blades on hand and consult your owner’s manual or blade packaging to confirm exact lengths for your specific trim and region.
How to get windshield wipers up on Hyundai Kona?
There. This allows you to lift the wipers up to clean the windshield or to service the wiper blades. To access the park setting turn the vehicle.
What size windshield wipers does a 2022 Hyundai Kona take?
2022 Hyundai Kona Windshield Wiper Blades - 26" Driver Side 16" Passenger Side.
How to remove 2022 Kona wiper blades?
While pushing the lock pull down on the wiper. Blade then remove it from the arm. To place new blades on the arm. Fit the new blade on the arm. And pull it up into the fitting.
Can I remove wiper arms without a special tool?
I often remove wiper arms using a wrench, when I haven't got any locking pliers around.