To replace the rear wiper blade on a 2020 CR-V, lift the wiper arm away from the glass, release and remove the old blade, fit a correctly sized replacement blade with the proper adapter, and reattach the arm. Then test the wipe to ensure a clean pass across the glass.
The rear wiper on the 2020 Honda CR-V sits on the tailgate and uses a relatively straightforward blade-and-adapter setup. Blade length is typically around 11 inches, but always verify the exact size and adapter type on the packaging or in the owner's manual before purchasing. The replacement process is quick and can be done with basic hand tools and minimal effort.
What you’ll need
Gather these items before you start to ensure a smooth replacement.
- Replacement rear wiper blade for the 2020 Honda CR-V (approximately 11 inches; verify size on packaging).
- Correct adapter for your wiper arm (many aftermarket blades include multiple adapters).
- Clean cloth or microfiber rag for glass and arm cleaning.
- Optional: small amount of alcohol wipe or glass cleaner to remove residue from the arm connection.
Having the right blade and adapter on hand helps prevent delays and ensures a secure fit once installed.
Steps to replace the rear wiper blade
Follow these steps in order to safely remove the old blade and install the new one.
- Prepare the vehicle: Turn off the ignition and open the rear hatch so you have clear access to the tailgate area. Gently move the wiper to the park position away from the glass if needed.
- Access and remove the old blade: Lift the wiper arm away from the glass to expose the blade adapter. Press the release tab or locking mechanism on the blade’s connector and slide the old blade out along the arm until it is freed.
- Prepare the new blade: Inspect the new blade and identify the correct adapter. If multiple adapters are included, choose the one that matches your wiper arm’s connector and attach it to the blade as instructed by the packaging.
- Attach the new blade: Align the adapter with the wiper arm’s connector and slide or snap the blade into place until you hear or feel a secure click. Do a light tug to confirm the blade is locked.
- Reinstall the arm: Lower the wiper arm back toward the glass slowly, ensuring it sits flush against the surface without bending the glass.
- Test the wiper: Turn the rear wiper on to verify smooth operation and that the blade makes full contact with the glass without skipping or chattering. If needed, wipe the glass with a cloth to remove any residual adhesive or moisture.
If the blade doesn’t feel secure or doesn’t wipe evenly, re-check the adapter compatibility and ensure the blade is fully seated in the arm’s connector.
Tips and troubleshooting
Helpful notes to ensure proper fit and operation:
- Always verify you’re buying the correct blade length for the 2020 Honda CR-V and that you have the right adapter for the wiper arm connector.
- Some aftermarket blades come with universal adapters; if yours doesn’t click into place, try a different adapter or consult the blade’s installation guide.
- Handle the wiper arm gently—the glass can be scratched if the blade is forced or if the arm is pressed too hard against it.
With the right blade and careful handling, replacing the rear wiper on your CR-V is a quick, DIY-friendly maintenance task.
Summary
The rear wiper blade replacement for a 2020 Honda CR-V involves preparing with the correct blade size and adapter, safely removing the old blade from the wiper arm, installing the new blade, and testing the wipe to ensure proper effectiveness. Confirm blade length (roughly 11 inches) and adapter compatibility before purchase, then follow the steps above for a clean, dependable rear windshield wipe.