To replace the rear wiper on a 2015 Dodge Journey, lift the wiper arm away from the rear window, detach the old blade from its connector, and snap on a new blade of the correct length until it clicks into place.
The replacement process is straightforward but requires the right blade size and connector type. This guide provides a step-by-step method, safety tips, and checks to ensure the new blade clears the window properly and lasts through rain and snow.
What you’ll need
Collect these items and confirm blade compatibility with your Dodge Journey’s rear wiper system.
- Replacement rear wiper blade compatible with 2015 Dodge Journey (verify the length on the existing blade or in the owner's manual; rear blades are commonly around 11 inches)
- Correct connector type for your wiper arm (check if it uses a J-hook, pin, or other quick-release style)
- Gloves or a microfiber cloth to handle the arm and blade
- Microfiber cloth for cleaning the window edge before installation
- Optional: small flathead screwdriver to help pry off any protective caps if your blade design requires it
Having the right blade length and connector type is essential for a secure fit and effective wiping performance.
Step-by-step replacement
Follow these steps to replace the blade safely and correctly.
- Park on level ground, turn the ignition off, and gently lift the rear wiper arm away from the window. Rest the arm on a soft surface to avoid scratches.
- Inspect the base of the blade where it attaches to the arm. Locate the locking tab or protective cap and release it according to your blade design to free the old blade.
- Slide the old blade downward and off the wiper arm. If there’s a protective cap, remove it before detaching the blade.
- Compare the new blade to the old one to confirm the length and connector type. Remove any protective covers from the new blade.
- Attach the new blade to the wiper arm by aligning it with the connector and sliding it until you hear or feel a click indicating it’s secured. Ensure the rubber edge faces the window and is oriented correctly.
- Lower the wiper arm back onto the rear window and test the blade by turning on the rear wiper. Check for smooth movement and proper clearance across the glass. If the blade binds, recheck alignment and connector compatibility.
Do not force a blade onto an incompatible connector, and handle the wiper arm gently to avoid bending or damaging the linkage.
Notes on compatibility and safety
Rear wiper connector designs can vary by model year and trim. If you’re unsure about blade length or the connector type, take the old blade with you to an auto parts store or consult the vehicle’s manual. If you’re uncomfortable performing this replacement, consider having a professional do it to prevent damage to the glass or wiper mechanism.
Testing and maintenance tips
After installation, operate the rear wiper a few times to ensure consistent contact and clear range. Clean the window edge and the blade periodically to extend life, and inspect the blade every few months for cracks or tearing, especially in extreme weather.
Summary
Replacing the rear wiper on a 2015 Dodge Journey involves lifting the wiper arm, releasing and removing the old blade, preparing and attaching a correctly sized replacement blade, and testing the setup. Verify blade length and connector type before purchase, handle components carefully, and seek professional help if you’re unsure. With the right blade installed, the Journey’s rear window should stay clear in rain and snow.