How to replace 2018 Kia Sorento wipers?

Replacing the wipers on a 2018 Kia Sorento is a quick DIY task that typically takes about 10 minutes. The front blades are 26 inches on the driver’s side and 18 inches on the passenger’s side, while the rear blade is 12 inches. With the right blades and a few simple motions, you can restore clear vision in rain or snow.

What You’ll Need

Gather these items before you begin so you can complete the job without interruptions.

• Front wiper blades: 26" (driver) and 18" (passenger)


• Rear wiper blade: 12"


• Microfiber cloth or glass cleaner for a quick wipe-down


• Optional: new wiper blade connectors or adapters if your chosen blades require them

Having the correct blades on hand will keep the process smooth and ensure a proper fit in the wiper arms.

Front Wiper Replacement

Front blade sizes for the Sorento

Before you begin, confirm the sizes: driver-side blade (26") and passenger-side blade (18"). Use blades designed for 9x3 or compatible hook-arm adapters as appropriate for your model year.

Follow these steps to replace the front blades on a 2018 Kia Sorento.

1. Turn the ignition off and gently lift the driver-side wiper arm away from the windshield until it locks upright.


2. Locate the release mechanism on the wiper blade where it attaches to the arm. Press the tab or lever and slide the old blade downward or outward to detach it from the hook.


3. Remove the old blade completely and wipe the blade pocket and arm with a cloth to remove any dirt or residue.


4. Take the new blade and attach it to the wiper arm, aligning it with the hook or adapter. Slide it in until you hear or feel a click indicating a secure fit.


5. Gently lower the wiper arm back onto the windshield, ensuring the blade sits flat against the glass.


6. Repeat the same process for the passenger-side blade (18").


7. Test the wipers with some windshield washer fluid or by running them briefly to ensure smooth operation and even contact with the glass.

With both front blades replaced, you should notice improved visibility and quieter operation during use.

Rear Wiper Replacement

The rear wiper on the Sorento uses a different mounting method than the front blades, so it requires a separate approach.

Rear blade size and compatibility

The rear wiper blade for a 2018 Sorento is typically 12 inches. Check your owner’s manual or the blade packaging to confirm the exact fit for your vehicle and ensure you choose a compatible connector type.

Proceed with the rear blade replacement as follows.

1. Lift the rear wiper arm away from the hatch glass until it stays in a raised position.


2. Inspect the blade’s attachment at the end of the wiper arm. Depending on the design, you may need to turn a small cap, press a release tab, or twist the blade to disengage from the arm.


3. Carefully remove the old blade from the arm and wipe the blade connector area clean.


4. Attach the new 12-inch rear blade to the arm following the connector’s alignment. Ensure it is securely seated and locked in place.


5. Lower the rear wiper arm back onto the hatch glass and give it a quick test by turning the rear wiper on to confirm proper contact and operation.

Rear wiper replacements are typically quicker but rely on the correct connector type, so verify compatibility if you’re buying aftermarket blades.

Summary

For a 2018 Kia Sorento, front wipers are typically 26" and 18" and rear wiper is 12". Gather the blades, release mechanisms, and a cleaning cloth, then follow the step-by-step lift, release, replace, and reseat process for the fronts, and a lift, release, and snap-on process for the rear. After replacing, test the wipers to ensure full contact with the glass and smooth operation in rain or snow. Regular replacement helps maintain visibility and driving safety.

How to change Sorento wipers?

Wipers. Just like that that's what I was pressing in on then when you got your new windshield wipers you want to come same way have your J hook up like that you see this come up underneath. There.

How to replace windshield wipers on a 2018 Kia Sorento?

Position raise the wiper arm. Open the wiper blade clip. And pull the blade down to detach. It install a new blade in the reverse. Order.

What size windshield wipers do I need for a 2018 Kia Sorento?

2018 Kia Sorento Wiper Blades Size/Price Chart

How to remove Kia brand windshield wipers?

Point be cautious not to scratch the windshield with the metal wiper arm. Now we're going to attach. The new wiper blade onto the arms hook or attachment.