The spare tire on a 2020 Chevy Silverado is stored under the rear of the vehicle and lowered with a manual crank. Use the included spare-tire tool to turn a hoist and bring the tire down, then detach it from the cradle and remove it from underneath the truck.
This guide walks you through locating the spare and its hoist, obtaining the correct tool, performing the lowering procedure, and safely removing the spare. Note that exact locations can vary by trim level, so consulting the owner’s manual or the tool kit in your Silverado is advisable if you don’t immediately spot the access point.
Where the spare lives and how it’s held
On the 2020 Silverado, the spare tire is mounted under the rear of the truck, secured by a cable-driven hoist. The crank/tool used to lower the tire is part of the spare-tire toolkit, which is stored in a designated location in the cab or bed area depending on trim. If you’re unsure where the tool lives, check your owner’s manual for the exact storage spot and the access point for the hoist.
Access point and tool overview
Access to the hoist is typically through a small round or square opening near the center of the undercarriage behind the rear bumper. A crank or square-ended tool fits into a receptacle on the hoist; turning counterclockwise lowers the spare. The spare remains attached to the cradle by a strap or hook until you actively detach it.
Step-by-step guide
Here's a straightforward, step-by-step method to safely lower and remove the spare tire from a 2020 Silverado.
- Park on a level surface and engage the parking brake. If possible, place wheel chocks on the wheels that remain on the ground.
- Locate the spare-tire hoist access point under the rear of the vehicle. Look for a small access panel or cover near the center underside; remove the panel if present.
- Retrieve the spare-tire tool from its storage location in the vehicle. If you can’t locate it, refer to the owner’s manual for the exact storage spot.
- Insert the crank tool into the hoist receptacle and turn it counterclockwise. The cable will wind and the spare tire will begin to lower toward the ground.
- Lower the tire until it is within easy reach and fully supported by the ground. Keep an eye on the weight to avoid slipping.
- Detach the spare from the cradle by releasing the strap or hook that holds the wheel to the hoist.
- Slide the spare away from under the vehicle and place it on the ground. If you’re planning to install it as a temporary replacement, keep the lug nuts and tools handy for mounting.
After lowering and removing the spare from under the Silverado, you can prepare it for installation or swap in a flat tire as needed. If you’re installing the spare right away, refer to your manual for the correct lug-nut torque and mounting procedure.
Safety considerations
Avoid crawling beneath the vehicle or relying on a jack alone to support it while you work on the spare. If the hoist doesn’t operate smoothly, the spare appears damaged, or you can’t locate the tool, contact roadside assistance. Always wear gloves to protect your hands, ensure the vehicle is secure on a flat surface, and use wheel chocks as needed.
Summary
Removing the spare on a 2020 Chevy Silverado is a tool-assisted, undercarriage operation. Locate the hoist access point, use the crank to lower the spare, detach it from the cradle, and pull it out from beneath the truck. Reinstalling the spare requires reversing these steps and following the manufacturer’s torque specifications for lug nuts. If you run into any uncertainty or accessibility issues, consult the owner’s manual or seek professional assistance.
How do I detach the spare tire?
Now what you have to do next is once you open it You want to take your key the same key you would use to unlock your door. And start your vehicle. Turn it and that pulls. Out.
How do I get my spare tire off my Chevy Silverado?
Here. Place it in the hole. And just kind of twist till you feel it catch. Now it might take a second but we got it right there take the open part of the wrench. Slide it over. And just start turning.
How to get the spare tire down on a 2019 Chevy Silverado?
It. After it lands Go ahead and give it about five more turns. You're going to have to get down on the ground. Remember you pull the tire out towards. You.
What's the worst year for Chevy Silverado 1500?
Worst Years for the Chevy Silverado 1500
- 2007–2011 (early GMT900) – Known for AFM oil use, lifter noise, and costly engine repairs.
- 2014–2016 (early K2XX) – Frequent A/C condenser leaks, transmission shudder, and cabin vibration.
- 2019–2021 (early T1XX) – DFM lifter failures and engine bearing issues that led to recalls.