The quickest way is to view the Tire Pressure Monitoring System (TPMS) readout on the Civic’s onboard display, either in the instrument cluster or on the center touchscreen. This shows each tire’s current PSI and flags when pressure is off.
As you use the Civic, you’ll notice that the exact path to view tire pressures varies by generation and trim. Newer Civics lean more on the center display, while older setups rely on the instrument cluster. Understanding where to look helps you monitor tire health without a handheld gauge. The recommended pressures are listed on the driver’s door jamb placard, and you should inflate to those numbers when necessary.
Where to find tire pressure data on the Civic’s display
Most Civics present tire pressures either on the instrument cluster’s digital display or on the center touchscreen, depending on model year and trim. The screen will label the readout as Tire Pressure, TPMS, or PSI readout.
- Instrument cluster/multi-information display (MID): On the steering wheel, press the i/Info button to cycle through screens until you reach Tire Pressure or TPMS, which shows the four tire readings.
- Center touchscreen: On trims with a larger infotainment display, go to Home or Menu > Settings > Vehicle > TPMS or Tire Pressure to view the same per-tire values.
- Warning indicators: If a tire is underinflated, a TPMS warning light will illuminate, and the screen may show a target or current pressure to guide inflation.
Knowing whether your Civic shows TPMS data on the dash or the center display helps you read pressures quickly and take action when needed.
Steps to view tire pressures on screen (step-by-step)
These steps cover the common paths across recent Civics. Exact wording can differ by year and trim, but the general flow is the same.
- Turn the ignition to ON or ACC with the engine off.
- Instrument cluster path: press the i/Info button on the steering wheel and cycle to Tire Pressure or TPMS to view per-tire PSI readings.
- Center touchscreen path: open Home or Menu, then Settings > Vehicle > TPMS or Tire Pressure to view the same four numbers.
- Compare the shown pressures with the door jamb placard and inflate any underinflated tire to the recommended level.
- After inflating, drive a short distance (a few miles) to let the system update; recheck on screen to confirm the readings have stabilized.
Following these steps lets you confirm current tire pressures quickly and keep tires wearing evenly and safely. If your model year places different menu labels or paths, consult the owner’s manual for the exact steps.
Model-year and trim differences
10th generation (2016–2021)
TPMS data appears mainly on the instrument cluster’s multi-information display. Access it with the steering wheel’s i button and cycle to Tire Pressure; some trims may show a quick readout on the cluster, with the full readout available through the MID.
11th generation and newer updates (2022–present)
The center touchscreen carries more of the TPMS functionality. You can view Tire Pressure via Home > Vehicle > TPMS or Tire Pressure, while the instrument cluster may still show a basic readout or alert.
Summary
Checking tire pressure on a Honda Civic via the on-screen display is a simple, two-path process: use the instrument cluster’s information screen or navigate the center touchscreen to TPMS/Tire Pressure. Always inflate to the door jamb placard’s recommended PSI, verify on screen after adjusting, and drive a few miles for the system to refresh. If you’re unsure about your specific model year, the owner’s manual provides the exact navigation steps.