To replace the wiper blades on a 2018 Volvo XC90, install front blades sized 26 inches on the driver’s side and 20 inches on the passenger side, plus an 11-inch rear blade. Replace by lifting the blades, releasing the connectors, and snapping on new blades until they lock in place. Use OEM or high-quality aftermarket blades and verify fit before driving.
Replacing wiper blades on the XC90 is a routine maintenance task that improves visibility in rain and snow. This guide covers both the front blades and the rear blade, with clear, step-by-step instructions. Always exercise caution to avoid damage to the windshield or wiper arms, and consult the owner’s manual or a dealer if you’re unsure about blade compatibility.
Front Wiper Blade Replacement
This section explains how to replace the two front wiper blades. The XC90 uses standard automotive blade attachments, but blade adapters can vary. Confirm you’re using 26-inch blades on the driver’s side and 20-inch blades on the passenger side, or check the packaging for the correct sizes for your vehicle.
- Park the car and turn off the engine. Gently lift the driver’s side wiper arm away from the windshield until it stays in a raised position.
- Locate the blade-adapter connection at the end of the wiper arm. Find the release tab or button on the blade housing.
- Release the old blade from the arm by pressing the release tab and sliding the blade off the hook or connector. If your blade uses a pin/clip system, press the release and slide the blade out along the arm.
- Prepare the new blade by removing any protective packaging. Align the new blade with the wiper arm’s connector and slide it into place until it clicks or is fully seated. Ensure the blade’s adaptor engages securely.
- Gently lower the new blade back onto the windshield and repeat the process on the passenger side with a 20-inch blade.
- Test the wipers at a low speed to confirm they seat properly and sweep the entire windshield without chatter or gaps.
The driver’s side blade is typically longer than the passenger side, so double-check that you’ve matched the correct sizes before installation. If you encounter resistance, avoid forcing the blade into place and re-check the adaptor alignment.
Choosing the Right Blades
For best performance, use Volvo-approved or high-quality aftermarket blades designed for the XC90. Look for features like beam or hybrid construction, weather-rated rubber, and corrosion-resistant fittings. Ensure the blades are listed as compatible with the 2018 XC90 and follow the packaging’s installation instructions for your specific connector type.
Rear Wiper Blade Replacement
The rear blade on the XC90 is narrower and attaches differently from the front blades. Replacing it involves a simple clip-on or slide-on adapter, depending on the model year. Use an 11-inch rear blade that is compatible with your vehicle’s rear wiper arm.
- Lift the rear wiper arm away from the rear window until it holds in a raised position.
- Find the release mechanism on the rear blade’s adaptor. This is typically a small tab or button on the blade housing.
- Depress the release and slide the old blade off the wiper arm adaptor. If necessary, rotate the blade slightly to disengage.
- Take the new rear blade and align it with the wiper arm’s adaptor. Slide it on until it locks securely. Some designs require a small push until you hear a click.
- Lower the rear wiper arm back onto the window and test by cycling the rear wiper to ensure full coverage without streaks.
Rear blade replacement is typically quicker than the front and involves a single blade. If the rear blade uses a different adaptor, consult the packaging or vehicle manual to confirm the correct installation method.
Summary
Replacing wiper blades on the 2018 XC90 is a straightforward task that most drivers can complete in a few minutes. Use 26-inch driver-side front blades and 20-inch passenger-front blades, plus an 11-inch rear blade. Follow the release mechanisms on the blades’ adapters, click them into place, and test the wipers to ensure complete, streak-free coverage. For best results, choose high-quality or OEM blades and verify compatibility with your specific XC90 configuration. If in doubt, a quick visit to a dealer or reputable auto parts retailer can confirm the exact blade sizes and adapter type for your vehicle.
How to change XC90 windshield wipers?
And do the inverse of that. Process. You're going to get. This little tab to slide in first push it down a bit slide the wiper.
What is the most common problem with a Volvo XC90?
What Are the Most Common Volvo XC90 Maintenance Issues?
- Suspension Wear. The XC90 is a heavier SUV, and over time, that weight puts stress on suspension parts.
- Transmission Concerns.
- Cooling System Leaks.
- Brake System Maintenance.
- HVAC and Climate Control Issues.
Can I remove wiper arms without a special tool?
I often remove wiper arms using a wrench, when I haven't got any locking pliers around.
How to put Volvo XC90 wipers in service mode?
And then wiper service position. You can see the wipers. Just go right there and now you can go ahead and change. Them. That's it thank you for watching mechanic or you can be the mechanic.