If you own a 2020 Honda CR-V, you can replace the front wipers with 26-inch driver-side blades and 17-inch passenger-side blades, plus an 11-inch rear blade. A typical replacement involves removing the old blades, attaching new ones with the correct adapters, and testing for a clear sweep.
What you’ll need
Gather the right blades and basic tools before you start. The CR-V uses separate front and rear blades, with specific connector types for each arm.
- Front wiper blades: 26 inches (driver) and 17 inches (passenger)
- Rear wiper blade: 11 inches
- New wiper blade kits with adapters compatible with your wiper arms (J-hook, pin, or side-lock styles)
- Soft cloth or microfiber towel to protect the windshield
- Gloves (optional) for grip and cleanliness
- Glass cleaner or isopropyl alcohol for cleaning blade contact points
With the right blades in hand, you’re ready to begin with the front wipers.
Front wipers replacement steps
These steps cover removing the old blades from the driver and passenger sides and installing the new ones. Ensure the vehicle is off and the wiper arms are at a safe distance from the glass during the process.
- Turn off the ignition and gently lift the wiper arm away from the windshield until it stays up on its own.
- Locate the blade’s release mechanism at the connection to the arm (usually a small tab or lever). Press or lift the tab to release the blade from the arm.
- Slide the old blade out of the arm’s connector. If your blade uses a pin or hook adapter, use the appropriate motion to disengage it.
- Compare the new blade to the old one to confirm correct length and connector type.
- Attach the new blade by aligning it with the arm’s connector and pushing until you hear a click or feel it lock in place. If adapters are needed, select the correct one before attaching.
- Gently lower the wiper arm back to the windshield and wipe the blade contact area with a clean cloth to remove any installation residue.
- Repeat the process for the other front blade, then test the wipers to confirm smooth, streak-free operation.
With the front blades replaced and functioning, you can proceed to the rear wiper if needed.
Rear wiper replacement
The 2020 CR-V uses an 11-inch rear blade. The rear blade connection is different from the front, and you typically release a small tab or slider to remove the blade from the arm before installing the new one.
- Lift the rear wiper arm away from the glass and hold it steady.
- Find the release clip or button on the blade housing and press or slide to disconnect the old blade from the arm.
- Remove the old blade from the wiper arm and set it aside.
- Attach the new rear blade by inserting it into the arm’s connector until it click-locks into place. Ensure it sits flush with the glass.
- Lower the rear wiper arm back onto the window and run the rear wiper a few cycles to verify a clean sweep.
After replacing the rear blade, test all wipers again to ensure clear visibility in varying conditions.
Choosing the right blade type and maintenance tips
Consider OEM Honda blades or trusted aftermarket options (Bosch, Rain-X, Valeo) that fit your wiper arm style. Verify connector compatibility (J-hook, pin, or side-lock) before purchase. Replace blades roughly every 6–12 months depending on climate and use, and clean the contact points and glass periodically to extend blade life.
Summary
To change the windshield wipers on a 2020 Honda CR-V, install 26-inch driver-side and 17-inch passenger-side front blades, and an 11-inch rear blade. Remove old blades by releasing the connectors, attach new blades with the correct adapters, and test the system to ensure a streak-free wipe. Regular maintenance and correct blade choices will help maintain visibility and safety.
Can I replace CRV wiper blades myself?
We're going to take our new wiper. Slide these bottom tabs in much easier on the other one cuz I'm looking into the sun. Now. Okay we got to get this tab on top of the wiper arm. And then it snaps in.
How to change windshield wipers on Honda 2020?
It. Now to insert your new wiper blades just depress the two tabs on the side of the wiper blade housing. And then just slip it on the wiper arm until you hear it click on.
What size wipers go on a 2020 Honda CR-V?
2020 Honda CR-V Wiper Blades Size/Price Chart
| Car | Driver | Pass. |
|---|---|---|
| 2020 Honda CR-V | 26 in. | 17 in. |
How to change windshield wiper blades on 2020 Honda CR-V?
And then you can pull it up. And out grab your new one. It's got like a T go in the gap right there. Kind of get it. Started. Once you get it. Started.