The rear wiper blade on a 2018 Honda CR-V is typically about 12 inches. Replacing it is a quick DIY task: lift the wiper arm, remove the old blade, fit a new blade into the connector, and test the wipe to ensure clear visibility.
On the 2018 CR-V, the rear wiper is mounted on the hatch and uses a straightforward snap-in connector. This guide covers identifying the right blade size, safely removing the old blade, installing the replacement, and verifying proper operation for continued rear visibility.
What you’ll need
Before you start, gather the correct blade size and any simple tools you might need. For the 2018 CR-V, a 12-inch rear wiper blade is typical, but verify the size on your vehicle or the replacement packaging to avoid mismatches.
- New rear wiper blade designed for a 12-inch rear fitment (confirm size before purchase)
- Cleaning cloth or isopropyl alcohol to clean the blade adapter and wiper arm area
- Optional: gloves for hand protection
With the right blade and a clean work area, you’re ready to proceed with the replacement. A properly installed blade will provide a clear rear view and prevent streaking.
Step-by-step replacement
Follow these steps one by one to replace the rear wiper blade safely and effectively.
- Ensure the ignition is off and gently lift the rear wiper arm away from the hatch until it stays in a raised position.
- Locate the release mechanism on the blade adapter. Press the release tab or button and slide the old blade away from the arm’s connector to remove it.
- Take the new blade and align its connector with the wiper arm. Slide the blade onto the arm until you hear or feel a click indicating the blade is securely attached.
- Gently lower the wiper arm back onto the rear window. Make sure the blade sits flush against the glass without bending.
- Test the wiper function with the ignition on to ensure the blade clears the glass without skipping or streaking.
- Inspect the blade and clean the surrounding area to remove any residue that could affect performance.
After the replacement, confirm that the blade operates smoothly and provides a clean wipe across the rear window. If you notice streaks or skipping, the blade may not be seated properly or may be the wrong size.
Tips and common questions
Choosing the right blade size is important for proper contact with the glass. If in doubt, check your owner’s manual or measure the existing blade to confirm a 12-inch replacement. If the connector seems different from the one you’re removing, check the packaging or manufacturer’s website for compatibility with the 2018 CR-V.
Summary
To replace the rear wiper blade on a 2018 Honda CR-V, confirm a 12-inch blade size, lift and secure the wiper arm, remove the old blade using the release mechanism, attach the new blade with a click, and test the wipe. Regular inspection and timely replacement will maintain rear visibility and improve safety in adverse conditions.
How to take rear wiper blade off Honda CRV?
So this is our torn uh wiper blade now this is the new one all you have to do is just slide the J hook. Inside just slide the J hook. And then you just have to push. Up.
How to change a rear wiper blade on a 2018 Honda CRV?
So it's super easy all we're going to do is lift up the windshield wiper arm. And then we're going to grab the wiper. And we're going to twist it to the right towards the passenger. Side as we twist.
What size rear wiper blade for 2018 Honda CRV?
12 in
2018 Honda CR-V Wiper Blades Size/Price Chart
| Car | Driver | Rear |
|---|---|---|
| 2018 Honda CR-V | 26 in. | 12 in. |
How do you change the wiper blades on a 2018 Honda CRV?
It. On this area. Here. And I'll slide it up.