In Honda City models equipped with Honda Sensing, activating ADAS starts by turning on the Sensing system with a dedicated button and then enabling features like Adaptive Cruise Control and Lane Keeping Assist through the steering wheel controls. The exact steps vary by model year and market, so always check your owner's manual or with a dealer for your specific trim.
ADAS, or Advanced Driver Assistance Systems, include functions such as Adaptive Cruise Control (ACC) with Low-Speed Follow, Lane Keeping Assist (LKAS), Collision Mitigation Braking System (CMBS), Road Departure Mitigation (RDM), and Traffic Sign Recognition (TSR). In many markets, these features are only available on higher trims or after a software update. If your City doesn't show the Sensing button or warning lights indicating activation, it may not be equipped with ADAS.
Is your Honda City equipped with ADAS?
Not all City models in all regions are offered with Honda Sensing. To confirm, check for a Honda Sensing button or menu option in the instrument cluster or infotainment system, review the trim level specification, or consult your dealer. Where available, ADAS features typically include ACC with distance control, LKAS, CMBS, RDM, and TSR, though exact availability varies by market and year.
How to activate Honda Sensing
Follow these steps to turn on the Honda Sensing system and begin using its driving-assist features. Note: some markets require additional enabling via the infotainment menu or may not offer certain features in lower trims.
Before listing steps, ensure the vehicle is stationary or at a safe starting condition and that the sensors are clean and unobstructed.
- Enter the vehicle with the engine off, then press the push-button start to power the electronics without pressing the accelerator, bringing the system online.
- Locate the Honda Sensing button or switch. It is usually found on the left side of the steering column or dash and may be labeled with a car icon or “Sensing.” Press it once to turn on the Sensing system.
- Check the instrument cluster for a “Sensing On” indicator, or a message such as “Sensing System Ready.” If you do not see this, the system may not be available on your trim or the sensors may be blocked or dirty.
- With Sensing ON, you can enable Adaptive Cruise Control (ACC). Press the Cruise button on the steering wheel, then press Set/Distance/Resume to set your desired speed.
- Use the distance control to adjust following distance. This is typically shown as a car icon with distance bars on the instrument cluster or a dedicated button on the steering wheel.
- To enable Lane Keeping Assist, press the LKAS button (often labeled “LKAS” or shown with a steering wheel icon). The LKAS indicator should illuminate on the dash, and the system will provide gentle steering inputs to help stay within lane markings when conditions are met.
- Drive with attention. ADAS assists, not replaces, driver responsibility. The system may disengage under certain conditions or require you to take control in complex traffic, poor weather, or road markings.
If activation fails or a warning appears, consult the owner’s manual or a Honda dealer to verify trim compatibility, software status, and sensor cleanliness.
Activating individual ADAS features
Once the Sensing system is ON, you can selectively enable ACC, LKAS, and other features via the steering wheel controls or instrument cluster menus. Availability and exact steps can vary by trim and market; if a feature cannot be activated, it may not be offered on your model or may require a software update.
Before listing steps, note that features often share the same activation base (Sensing must be ON) and some functions may only operate above certain speeds or in specific conditions.
- Adaptive Cruise Control (ACC): Press the Cruise button, then use Set/Distance/Resume to select a cruising speed. ACC will maintain distance from the car ahead automatically as long as conditions permit.
- Distance setting for ACC: Use the distance control to adjust following distance. Shorter distances allow closer following; longer distances increase the gap for safety.
- Lane Keeping Assist (LKAS): With Sensing ON, press the LKAS button to activate. The system will provide occasional steering assistance to help keep you centered in the lane when lane markings are detected.
- Collision Mitigation Braking System (CMBS): CMBS is typically active when Sensing is ON and a potential collision is detected. There is usually no separate ON/OFF control beyond ensuring the Sensing system is enabled, and the system will warn or brake automatically if a risk is detected.
- Road Departure Mitigation (RDM) and Traffic Sign Recognition (TSR): If available, these features can be toggled via the vehicle’s settings or cluster menus. Refer to the owner’s manual for exact navigation paths in your infotainment system.
- If the vehicle requires maintenance or software updates to enable a feature, a dealer visit may be necessary to unlock or update capabilities.
Note: Availability and behavior of features can vary by market, year, and trim. Always refer to your specific model’s manual for precise steps.
Limitations and safety reminders
ADAS assists but does not replace driver attention. Keep hands on the wheel when using ACC or LKAS, and be prepared to take control at any time. System performance can be affected by weather, road markings, lighting, and sensor cleanliness. Avoid relying on ADAS in heavy rain, snow, fog, or in construction zones or on winding roads where driver intervention may be required.
Maintenance and care for ADAS sensors
To keep ADAS working reliably, perform routine sensor maintenance and software updates as recommended by Honda.
Before listing maintenance tips, note that clean sensors and proper alignment are essential for optimal performance.
- Regularly wash the front sensors and camera housings; avoid applying wax or abrasive cleaners on sensor surfaces.
- Inspect for physical damage or misalignment after any collision or heavy impact; have sensors recalibrated if required.
- Keep the windshield and camera housing areas clean to avoid vision issues for TSR and camera-based features.
- Ensure software updates are applied, either via dealer service or approved OTA updates when available.
- Watch for warning indicators in the instrument cluster; if a fault code appears, have the system inspected by a qualified technician.
Regular maintenance and correct calibration help ensure ADAS features work as intended and provide the best possible driver assistance.
Summary
Activating ADAS in Honda City involves confirming your trim supports Honda Sensing, turning on the system with the dedicated button, and then enabling features such as ACC and LKAS via steering wheel controls. The exact steps vary by market and year, so consult your manual or dealer for model-specific instructions. Remember that ADAS aids are supplementary and require driver attention at all times; keep sensors clean and software up-to-date for optimal performance.
Is ADAS available in Honda City?
It excels in practicality with comfortable front and rear seats, is reasonably feature-rich, and even gets an ADAS system. The performance comes from an ever-reliable 1.5-litre petrol mill that is refined, responsive and reliable.
Ask More
How do I turn on ADAS in Honda City?
And it's just a scroll away you just scroll it. Down turn the collision mitigation braking system off. And you're good to go. So how do you like this feature tell us in the comment section below.
Can ADAS be turned off in Honda City?
Hold the ADAS button for a few seconds and it turns off the 3 most annoying safety systems in one go.
Ask More
Does ADAS work in City?
ADAS works well on highways and in light traffic but can struggle with poorly marked lanes and chaotic city driving; regular sensor maintenance helps it perform reliably.
Ask More