The Chrysler 200, produced from 2011 to 2017, used two main gasoline engines. Oil capacity depends on which engine your car has: about 4.5 quarts with a filter for the 2.4L Tigershark inline-4, and roughly 5.5–6.0 quarts with a filter for the 3.6L Pentastar V6. Always refer to the owner's manual for the exact specification and use synthetic oil as recommended.
Engine options and typical oil capacities
The Chrysler 200 offered two engine options during its production run. The figures below reflect common oil capacities for each engine when performing a standard oil change with a new filter.
- 2.4L Tigershark I4: about 4.5 quarts (4.3 L) with a new filter.
- 3.6L Pentastar V6: about 5.5–6.0 quarts (5.2–5.7 L) with a new filter.
These figures are approximate and can vary slightly by model year or drivetrain. Always verify in the owner's manual or on the engine oil capacity sticker under the hood.
Oil type and viscosity recommendations
Oil grade and type depend on the engine and climate. The following guidelines apply to typical Chrysler 200 applications.
- 2.4L Tigershark I4: synthetic oil, commonly 0W-20 or 5W-20 depending on year and climate; confirm in the owner's manual.
- 3.6L Pentastar V6: synthetic oil, commonly 5W-20; 0W-20 may be acceptable in very cold climates per manual.
Using the recommended viscosity helps with cold starts, fuel economy, and engine protection. Do not exceed the specified capacity, including the filter.
Maintenance considerations and oil change intervals
Oil change intervals depend on oil type and driving conditions. In general, owners who use conventional oil may aim for shorter intervals, while those using synthetic oil can often extend the interval. Always follow the maintenance schedule in the owner's manual, and use reputable oil and a fresh filter at every change.
Additionally, check the oil level regularly using the dipstick, especially after an oil change. If you notice leaks or burning oil, address them promptly with a qualified technician.
Summary
The Chrysler 200's oil capacity depends on engine choice: about 4.5 quarts for the 2.4L Tigershark and about 5.5–6.0 quarts for the 3.6L Pentastar, both with a replacement filter. Use the recommended synthetic oil grade for your engine and climate, and always consult the owner's manual for the exact specification and capacity.