The 2016 Honda CR-V with the 2.4-liter engine uses about 4.5 quarts (4.3 liters) of engine oil when performing an oil change with a new filter. Honda recommends 0W-20 full synthetic oil as the standard specification for this model. Always verify the exact requirement in your owner’s manual or service guide for your region.
Oil capacity and oil type for the 2016 CR-V
Key numbers and guidance for the U.S.-market CR-Vs of this year:
- Engine: 2.4-liter inline-4 i-VTEC (US-market 2016 CR-V)
- Oil capacity: 4.5 quarts (4.3 liters) with a new filter
- Recommended oil grade: 0W-20 full synthetic (some regions may accept 5W-20 if 0W-20 isn’t available; always follow local guidance)
- Draining/refilling steps (summary): warm engine, drain oil, replace filter, add up to 4.5 quarts, run the engine, recheck and top up to the full mark
Bottom line: 4.5 quarts is the standard capacity for the 2016 CR-V's engine when performing a proper oil change with a new filter.
Market variations and additional guidance
Note: In non-U.S. markets, there were variations such as the availability of different engines (for example, diesel options in some regions) with different oil capacities and viscosities. For those variants, consult the local owner’s manual to confirm the exact specification.
Summary
The standard oil capacity for a 2016 Honda CR-V with the 2.4L engine is 4.5 quarts (4.3 liters) of engine oil with a new filter, using 0W-20 full synthetic. Verify the exact amount with the dipstick after filling and consult the owner’s manual for regional variations and maintenance intervals.