The Infiniti QX50’s 2.0L VC-Turbo engine generally requires about 4.8 quarts (roughly 4.6 liters) of engine oil with a new filter. This is the typical capacity for current models, but always confirm with your owner's manual or the under-hood sticker for your exact year and region.
Because Infiniti has used the same family of 2.0L engines across multiple model years and markets, the exact capacity can vary slightly depending on year, trim, and whether the oil filter is included in the measurement. Most official guides cite about 4.8 quarts (with filter) and roughly 4.2–4.4 quarts without the filter; when in doubt, rely on the precise specification in your owner's manual.
Typical capacity by year/variant
Note: the following figures reflect common reference values for the 2.0L VC-Turbo QX50 in recent years. Always verify with the official documentation.
- Oil capacity with filter: about 4.8 quarts (4.6 L).
- Oil capacity without filter: roughly 4.2–4.4 quarts (3.9–4.2 L).
- Some regional specifications may list small variations around these numbers; check the exact spec for your vehicle.
In practice, start with 4.8 quarts when performing a full oil change with a new filter, then top up carefully after checking the dipstick to reach the correct level.
Practical tips
Use the recommended oil grade (typically 0W-20 full synthetic in most markets). After changing, run the engine, turn it off, wait a few minutes, then recheck the level. Dispose of used oil according to local regulations and reset the oil-life monitor if applicable.
Summary
For most Infiniti QX50 models equipped with the 2.0L VC-Turbo engine, the typical oil capacity is about 4.8 quarts (4.6 liters) with a filter. Always verify the exact capacity for your year and market and follow Infiniti’s recommended oil grade for optimal performance.