Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How much oil does a Mitsubishi Outlander Sport need?

The typical Mitsubishi Outlander Sport with the common 2.0-liter engine requires about 4.7 quarts (roughly 4.4 liters) of engine oil when performing a full change with a filter. If you’re not replacing the oil filter, the capacity is around 4.4 quarts (about 4.2 liters). Always verify the exact figure for your model year and engine variant.


The Outlander Sport's oil capacity varies by engine configuration and whether the filter is changed during an oil service. The most widely used specification applies to the 2.0-liter MIVEC engine found in recent model years, but there can be small differences based on year, market, or trim. The following figures cover the typical, commonly cited values for the standard engine.


Oil capacity for the common 2.0-liter Outlander Sport engine


Below are the typical capacity figures you’ll see quoted for the standard 2.0-liter engine when performing an oil change. These help you plan how much oil to purchase and how much to pour.



  • With oil filter replacement: 4.7 quarts (4.4 liters)

  • Without oil filter replacement: 4.4 quarts (4.2 liters)


These numbers reflect the standard practice of including the oil filter in the full-change capacity. Always confirm with your vehicle’s owner manual or the under-hood label for your exact year and engine variant.


Practical notes on oil type and service guidance


Choosing the right oil and following the correct service interval are essential to keep the engine healthy. The Outlander Sport generally recommends a specific viscosity and quality that aligns with modern engine tolerances.



  • Oil type: SAE 0W-20 full synthetic is commonly recommended for the 2.0-liter engine, but always use the viscosity specified in your owner's manual.

  • Change interval: Oil change intervals can vary by year and driving conditions; follow the schedule in the manual and consider more frequent changes under severe driving conditions.


Sticking to the recommended oil type and change schedule helps protect the engine and maintain performance over time.


Notes on variations by year and market


While the 2.0-liter engine is the standard for most Outlander Sport models, some markets or limited configurations may have different engine options. In those cases, capacity figures can differ slightly. Always consult the exact owner’s manual, the maintenance booklet, or the under-hood information label for your specific vehicle to ensure accuracy.


Summary


For the majority of Mitsubishi Outlander Sport models powered by the 2.0-liter engine, plan on about 4.7 quarts (4.4 liters) of engine oil when you change the oil with the filter, or about 4.4 quarts (4.2 liters) if you’re not changing the filter. Use the oil type and change interval specified in your manual, and verify the figure for your exact year and market.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.