The 4.0-liter Tacoma V6 typically requires about 6.0 quarts (roughly 5.7 liters) of oil when you replace the filter. If you’re not changing the filter, the capacity is around 5.7 quarts (about 5.4 liters).
Oil capacity specifics
The figures below reflect the standard capacity cited for the 1GR-FE 4.0L V6 used in most Toyota Tacomas. Exact numbers can vary slightly by model year or engine revision, but these are the commonly referenced values.
- With oil filter: 6.0 quarts (5.7 liters)
- Without oil filter: 5.7 quarts (5.4 liters)
When performing an oil change, use these figures as a guideline and confirm with your owner's manual or dealer if you have a rare or year-specific variation. After adding oil, recheck the level with the dipstick and top off as needed to reach the correct mark.
Practical reminders
For best results, use the recommended viscosity for your climate (often 5W-30 for many Tacomas) and consider a high-quality synthetic if you drive in varying temperatures or want longer intervals between changes. Always allow the engine to cool before checking the oil level and never overfill.
Summary
In short, plan for about 6.0 quarts of oil (5.7 liters) when replacing the filter on a 4.0L Tacoma V6, and approximately 5.7 quarts (5.4 liters) if you’re not changing the filter. Verify with your manual and use the dipstick to ensure accurate oil level after a change.
Is the 4L V6 a good engine?
The 4.0 L V6 stood out from similar engines of the time. While it wasn't necessarily the most powerful engine available during its era, it was one of the most reliable and fuel-efficient. This made it a popular choice in cars used as daily drivers or for lighter towing.
How many quarts of oil does a 4.0 V6 Toyota Tacoma take?
Toyota Tacoma Oil Capacity
A Full Change, Oil Plus Filter: 6.1—6.2 quarts.
Can I put 5W30 in my Tacoma?
What type of oil does my Toyota Tacoma take? Toyota Tacoma oil requirements depend on your model year and engine type. 2016-2019 Tacoma V6 models require 0W-20, while 2020-newer V6 engines switched to 5W-30 for improved high-load protection.
What oil to use for Toyota 4.0 V6?
5W-30
Quick Reference Guide
| Model Year Range | Engine Types | Recommended Oil |
|---|---|---|
| 1995–2015 | 2.7L I4 / 4.0L V6 | 5W-30 (original), 0W-20 (updated) |
| 2016–2022 | 2.7L I4 / 3.5L V6 | 0W-20 synthetic |
| 2023+ | 2.4L Turbo / Hybrid Powertrains | 0W-20 synthetic |