Short answer: The 2016 CR-V with the 2.4-liter engine takes about 4.5 quarts (4.3 liters) of engine oil when you change the oil with a new filter, using 0W-20 full-synthetic oil.
More detail: The 2016 CR-V uses Honda’s 2.4L inline-4 engine, and Honda's official specification lists a total oil capacity of 4.5 US quarts with the filter installed. Actual amounts can vary slightly depending on whether you replace the oil filter and how much oil remains in the filter and engine after draining. Always verify the level with the dipstick after filling and refer to the owner's manual for your market, since regional variations can occur.
Oil capacity and specifications for the 2016 CR-V
The following notes summarize the key figures and guidelines you should follow during an oil change.
- Oil capacity (with new filter): 4.5 quarts (4.3 liters)
- Recommended oil type: 0W-20 full synthetic (as specified by Honda for most climates)
- Filter: Use a quality oil filter, Honda OEM or equivalent
When performing the oil change, add oil gradually, recheck the level with the dipstick, and allow the engine to sit for a few minutes after starting to settle before taking a final reading. If the level sits near the full mark after a new fill, you may not need to add more oil.
Summary
For the 2016 Honda CR-V (2.4L engine), plan to add about 4.5 quarts of engine oil with a new filter, using 0W-20 full synthetic oil. Always confirm the exact quantity with the dipstick after filling and consult the owner's manual or a Honda dealer if you’re unsure about regional specifications.