Approximately 4.4 quarts (about 4.2 liters) of engine oil are needed when performing a standard oil change with a new filter; if you do not replace the filter, the total is about 4.0 quarts (roughly 3.8 liters).
Engine and oilCapacity overview
The 2014 Honda Accord 2.4 L uses a four-cylinder i-VTEC engine. Oil capacity depends on whether the oil filter is replaced during the change. The figures below reflect typical service practice for this engine.
Note: The exact amount can vary slightly depending on the oil filter type and any regional service specifications. Use the dipstick to confirm the final oil level after adding oil and running the engine to temperature.
- With engine oil filter replaced: 4.4 quarts (approximately 4.2 liters)
- Without replacing the filter: 4.0 quarts (approximately 3.8 liters)
When performing an oil change, most technicians fill to the 4.4-quart mark with a new filter and then top off as needed after checking the level on the dipstick.
Oil grade and maintenance tips
Honda generally recommends 0W-20 synthetic oil for this engine, though 5W-20 can be acceptable in certain climates. Always verify the exact specification in the owner's manual or with a dealer for your VIN and driving conditions, and ensure the filter used is compatible with your engine.
Practical guidance for owners
Keep in mind that oil capacity is a useful guideline for planning maintenance but the final level should be verified with a warm engine and dipstick. Use the recommended grade and service interval to maintain performance and reliability.
Summary
The 2014 Honda Accord 2.4 L engine holds about 4.4 quarts (roughly 4.2 liters) of oil with a new filter during a typical oil change; about 4.0 quarts (around 3.8 liters) if the filter is not replaced. Always consult the owner's manual for the exact specification and follow up with a dipstick check to ensure proper oil level.