The 2014 Silverado with the 5.3-liter V8 typically requires about 8 quarts of engine oil when performing a full oil change with a new filter, or around 7 quarts if you drain and refill without changing the filter. Use Dexos1 Gen 2 5W-30 and verify the level with the dipstick after filling.
Official capacity for service
Two common service scenarios
Here are the standard oil capacities you’ll encounter when servicing this engine. The values refer to quarts (liters) and assume a typical filter change.
- With a new oil filter: 8 quarts (7.6 liters)
- Drain-and-fill only (no filter change): about 7 quarts (6.6 liters)
These figures come from GM service data for the 5.3L V8 used in the 2014 Silverado. Always confirm with the dipstick after filling and consult your owner's manual for your exact vehicle configuration.
Practical maintenance notes
In addition to knowing the capacity, follow these guidelines to ensure a proper oil change. Use Dexos1 Gen 2 5W-30 for most conditions, install a high-quality oil filter, and recheck the level after starting the engine and allowing it to settle. Top off as needed to bring the level between the “Full” marks on the dipstick.
Summary
For a 2014 Chevy Silverado with the 5.3L V8, plan on about 8 quarts of oil when changing the filter, or 7 quarts if you’re not changing the filter. Use Dexos1 Gen 2 5W-30 and verify the level with the dipstick after servicing.